On Line 154 I have default Auth-Type = ntlm_auth. If I comment this out I get the Access-reject packet. thanks, SB
On 4/27/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Well, it matched something in the users file: > > users: Matched entry DEFAULT at line 154 > > > Dana 27/4/2007, "shrikant Bhat" <[EMAIL PROTECTED]> piše: > > >Yes I figured that. thanks for that. But the issues is the user I am > >trying to authenticate is not listed in users file or in AD, so I dont > >understand how is it authenticating this user. > >I have attached debug . > >thanks for the help. > > > >********************************************************************************************************* > >rad_recv: Access-Request packet from host 127.0.0.1:32779, id=100, length=59 > > User-Name = "raduser" > > User-Password = "radpass" > > NAS-IP-Address = 255.255.255.255 > > NAS-Port = 0 > > Processing the authorize section of radiusd.conf > >modcall: entering group authorize for request 3 > > modcall[authorize]: module "preprocess" returns ok for request 3 > > modcall[authorize]: module "chap" returns noop for request 3 > > modcall[authorize]: module "mschap" returns noop for request 3 > > rlm_realm: No '@' in User-Name = "raduser", looking up realm NULL > > rlm_realm: No such realm "NULL" > > modcall[authorize]: module "suffix" returns noop for request 3 > > rlm_eap: No EAP-Message, not doing EAP > > modcall[authorize]: module "eap" returns noop for request 3 > > users: Matched entry DEFAULT at line 154 > > modcall[authorize]: module "files" returns ok for request 3 > >modcall: leaving group authorize (returns ok) for request 3 > > rad_check_password: Found Auth-Type ntlm_auth > >auth: type "ntlm_auth" > > Processing the authenticate section of radiusd.conf > >modcall: entering group authenticate for request 3 > >radius_xlat: Running registered xlat function of module mschap for > >string 'User-Name' > >radius_xlat: '--username=raduser' > >radius_xlat: '--password=radpass' > > modcall[authenticate]: module "ntlm_auth" returns ok for request 3 > >modcall: leaving group authenticate (returns ok) for request 3 > >Sending Access-Accept of id 100 to 127.0.0.1 port 32779 > >Finished request 3 > >Going to the next request > >--- Walking the entire request list --- > >Waking up in 6 seconds... > >--- Walking the entire request list --- > >Cleaning up request 3 ID 100 with timestamp 4631d1f0 > >Nothing to do. Sleeping until we see a request. > >**************************************************************************************************** > > > >On 4/27/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > >> Error seems to be because shared secret is testing123 not testing 123. > >> But you need to paste output od radiusd-X after Access-Request. Open two > >> ssh sessions and do radtest from one and radiusd -X from the other. > >> > >> Ivan Kalik > >> Kalik Informatika ISP > >> > >> > >> Dana 27/4/2007, "shrikant Bhat" <[EMAIL PROTECTED]> pi e: > >> > >> >I get this error > >> >[EMAIL PROTECTED] ~]# radtest raduser radpass localhost 0 testing 123 > >> >Sending Access-Request of id 47 to 127.0.0.1 port 1812 > >> > User-Name = "raduser" > >> > User-Password = "radpass" > >> > NAS-IP-Address = 255.255.255.255 > >> > NAS-Port = 0 > >> > Framed-Protocol = PPP > >> >rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=47, length=20 > >> >rad_verify: Received Access-Accept packet from client 127.0.0.1 port > >> >1812 with invalid signature (err=2)! (Shared secret is incorrect.) > >> > > >> >On 4/27/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > >> >> And what happens when you get Access-Request? > >> >> > >> >> > >> >> Dana 27/4/2007, "shrikant Bhat" <[EMAIL PROTECTED]> pi e: > >> >> > >> >> >Hello Alan, > >> >> >I have built and installed 1.1.6 version of FreeRadius. When I test > >> >> >using radtest it authenticates any user with any pasword, what I mean > >> >> >by this is it doesnt seem to contact the ADS to lookup the user > >> >> >information and authenticate. I have attached the debug > >> >> >***************************************************************************************************** > >> >> >[EMAIL PROTECTED] raddb]# /usr/local/sbin/radiusd -X > >> >> >Starting - reading configuration files ... > >> >> >reread_config: reading radiusd.conf > >> >> >Config: including file: /etc/raddb/clients.conf > >> >> >Config: including file: /etc/raddb/snmp.conf > >> >> >Config: including file: /etc/raddb/eap.conf > >> >> >Config: including file: /etc/raddb/sql.conf > >> >> > main: prefix = "/usr" > >> >> > main: localstatedir = "/var" > >> >> > main: logdir = "/var/log/radius" > >> >> > main: libdir = "/usr/lib" > >> >> > main: radacctdir = "/var/log/radius/radacct" > >> >> > main: hostname_lookups = no > >> >> > main: max_request_time = 30 > >> >> > main: cleanup_delay = 5 > >> >> > main: max_requests = 1024 > >> >> > main: delete_blocked_requests = 0 > >> >> > main: port = 0 > >> >> > main: allow_core_dumps = no > >> >> > main: log_stripped_names = no > >> >> > main: log_file = "/var/log/radius/radius.log" > >> >> > main: log_auth = no > >> >> > main: log_auth_badpass = no > >> >> > main: log_auth_goodpass = no > >> >> > main: pidfile = "/var/run/radiusd/radiusd.pid" > >> >> > main: user = "radiusd" > >> >> > main: group = "radiusd" > >> >> > main: usercollide = no > >> >> > main: lower_user = "no" > >> >> > main: lower_pass = "no" > >> >> > main: nospace_user = "no" > >> >> > main: nospace_pass = "no" > >> >> > main: checkrad = "/usr/sbin/checkrad" > >> >> > main: proxy_requests = yes > >> >> > security: max_attributes = 200 > >> >> > security: reject_delay = 1 > >> >> > security: status_server = no > >> >> > main: debug_level = 0 > >> >> >read_config_files: reading dictionary > >> >> >read_config_files: reading naslist > >> >> >Using deprecated naslist file. Support for this will go away soon. > >> >> >read_config_files: reading clients > >> >> >read_config_files: reading realms > >> >> >radiusd: entering modules setup > >> >> >Module: Library search path is /usr/lib > >> >> >Module: Loaded expr > >> >> >Module: Instantiated expr (expr) > >> >> >Module: Loaded exec > >> >> > exec: wait = no > >> >> > exec: program = "/usr/bin/ntlm_auth --request-nt-key > >> >> >--domain=MYDOMAIN.COM --username=%{mschap:User-Name} > >> >> >--password=%{User-Password}" > >> >> > exec: input_pairs = "request" > >> >> > exec: output_pairs = "(null)" > >> >> > exec: packet_type = "(null)" > >> >> >Module: Instantiated exec (ntlm_auth) > >> >> >Module: Loaded CHAP > >> >> >Module: Instantiated chap (chap) > >> >> >Module: Loaded preprocess > >> >> > preprocess: huntgroups = "/etc/raddb/huntgroups" > >> >> > preprocess: hints = "/etc/raddb/hints" > >> >> > preprocess: with_ascend_hack = no > >> >> > preprocess: ascend_channels_per_line = 23 > >> >> > preprocess: with_ntdomain_hack = no > >> >> > preprocess: with_specialix_jetstream_hack = no > >> >> > preprocess: with_cisco_vsa_hack = no > >> >> >Module: Instantiated preprocess (preprocess) > >> >> >Module: Loaded MS-CHAP > >> >> > mschap: use_mppe = yes > >> >> > mschap: require_encryption = no > >> >> > mschap: require_strong = no > >> >> > mschap: with_ntdomain_hack = yes > >> >> > mschap: passwd = "(null)" > >> >> > mschap: authtype = "MS-CHAP" > >> >> > mschap: ntlm_auth = "(null)" > >> >> >Module: Instantiated mschap (mschap) > >> >> >Module: Loaded realm > >> >> > realm: format = "suffix" > >> >> > realm: delimiter = "@" > >> >> > realm: ignore_default = no > >> >> > realm: ignore_null = no > >> >> >Module: Instantiated realm (suffix) > >> >> >Module: Loaded eap > >> >> > eap: default_eap_type = "md5" > >> >> > eap: timer_expire = 60 > >> >> > eap: ignore_unknown_eap_types = no > >> >> > eap: cisco_accounting_username_bug = no > >> >> >rlm_eap: Loaded and initialized type md5 > >> >> >rlm_eap: Loaded and initialized type leap > >> >> > gtc: challenge = "Password: " > >> >> > gtc: auth_type = "PAP" > >> >> >rlm_eap: Loaded and initialized type gtc > >> >> > mschapv2: with_ntdomain_hack = no > >> >> >rlm_eap: Loaded and initialized type mschapv2 > >> >> >Module: Instantiated eap (eap) > >> >> >Module: Loaded files > >> >> > files: usersfile = "/etc/raddb/users" > >> >> > files: acctusersfile = "/etc/raddb/acct_users" > >> >> > files: preproxy_usersfile = "/etc/raddb/preproxy_users" > >> >> > files: compat = "cistron" > >> >> >[/etc/raddb/users]:1 Cistron compatibility checks for entry raduser ... > >> >> >[/etc/raddb/users]:153 Cistron compatibility checks for entry DEFAULT > >> >> >.. > >> >> >?Changing 'Auth-Type =' to 'Auth-Type +=' > >> >> >[/etc/raddb/users]:172 Cistron compatibility checks for entry DEFAULT > >> >> >.. > >> >> >[/etc/raddb/users]:184 Cistron compatibility checks for entry DEFAULT > >> >> >.. > >> >> >[/etc/raddb/users]:191 Cistron compatibility checks for entry DEFAULT > >> >> >.. > >> >> >[/etc/raddb/users]:198 Cistron compatibility checks for entry DEFAULT > >> >> >.. > >> >> >Module: Instantiated files (files) > >> >> >Module: Loaded Acct-Unique-Session-Id > >> >> > acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, > >> >> >Client-IP-Address, NAS-Port" > >> >> >Module: Instantiated acct_unique (acct_unique) > >> >> >Module: Loaded detail > >> >> > detail: detailfile = > >> >> >"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" > >> >> > detail: detailperm = 384 > >> >> > detail: dirperm = 493 > >> >> > detail: locking = no > >> >> >Module: Instantiated detail (detail) > >> >> >Module: Loaded System > >> >> > unix: cache = no > >> >> > unix: passwd = "(null)" > >> >> > unix: shadow = "/etc/shadow" > >> >> > unix: group = "(null)" > >> >> > unix: radwtmp = "/var/log/radius/radwtmp" > >> >> > unix: usegroup = no > >> >> > unix: cache_reload = 600 > >> >> >Module: Instantiated unix (unix) > >> >> >Module: Loaded radutmp > >> >> > radutmp: filename = "/var/log/radius/radutmp" > >> >> > radutmp: username = "%{User-Name}" > >> >> > radutmp: case_sensitive = yes > >> >> > radutmp: check_with_nas = yes > >> >> > radutmp: perm = 384 > >> >> > radutmp: callerid = yes > >> >> >Module: Instantiated radutmp (radutmp) > >> >> >Listening on authentication *:1812 > >> >> >Listening on accounting *:1813 > >> >> >Ready to process requests. > >> >> >*********************************************************************** > >> >> >Thanks > >> >> >SB > >> >> > > >> >> >On 4/23/07, Alan DeKok <[EMAIL PROTECTED]> wrote: > >> >> >> shrikant Bhat wrote: > >> >> >> > 1.The document says adding exec ... to the modules section and > >> >> >> > then > >> >> >> > listing ntlm_auth in the authenticate section. when I have exec > >> >> >> > ntlm_auth in modules section and ntlm_auth listed in authenticate > >> >> >> > section I get 'Unknown Auth-Type "exec" in authenticate section' > >> >> >> > error > >> >> >> > how do I fix this? please help. > >> >> >> > I have attached my radiusd.conf file. > >> >> >> > >> >> >> All I know is that it works for me in 1.1.6. > >> >> >> > >> >> >> > 2. To authenticate cisco telnet sessions, is it possible to use > >> >> >> > freeRadius with AD integration > >> >> >> > what I mean by this is can I telnet using my ad ID and password > >> >> >> > with > >> >> >> > freeRadius being authentication server? > >> >> >> > >> >> >> Yes. > >> >> >> > >> >> >> Alan DeKok. > >> >> >> -- > >> >> >> http://deployingradius.com - The web site of the book > >> >> >> http://deployingradius.com/blog/ - The blog > >> >> >> - > >> >> >> List info/subscribe/unsubscribe? See > >> >> >> http://www.freeradius.org/list/users.html > >> >> >> > >> >> >- > >> >> >List info/subscribe/unsubscribe? See > >> >> >http://www.freeradius.org/list/usershtml > >> >> > > >> >> > > >> >> > >> >> - > >> >> List info/subscribe/unsubscribe? See > >> >> http://www.freeradius.org/list/users.html > >> >> > >> > > >> >- > >> >List info/subscribe/unsubscribe? See > >> >http://www.freeradius.org/list/usershtml > >> > > >> > > >> > >> - > >> List info/subscribe/unsubscribe? See > >> http://www.freeradius.org/list/users.html > >> > > > >- > >List info/subscribe/unsubscribe? See > >http://www.freeradius.org/list/users.html > > > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html