Hi,
Any one who can help me with this ?
thanks in advance
SB

On 4/27/07, shrikant Bhat <[EMAIL PROTECTED]> wrote:
> On Line 154 I have default Auth-Type = ntlm_auth. If I comment this
> out I get the Access-reject packet.
> thanks,
> SB
>
> On 4/27/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> > Well, it matched something in the users file:
> >
> > users: Matched entry DEFAULT at line 154
> >
> >
> > Dana 27/4/2007, "shrikant Bhat" <[EMAIL PROTECTED]> piše:
> >
> > >Yes I figured that. thanks for that. But the issues is the user I am
> > >trying to authenticate is not listed in users file or in AD, so I dont
> > >understand how is it authenticating this user.
> > >I have attached debug .
> > >thanks for the help.
> > >
> > >*********************************************************************************************************
> > >rad_recv: Access-Request packet from host 127.0.0.1:32779, id=100, 
> > >length=59
> > >        User-Name = "raduser"
> > >        User-Password = "radpass"
> > >        NAS-IP-Address = 255.255.255.255
> > >        NAS-Port = 0
> > >  Processing the authorize section of radiusd.conf
> > >modcall: entering group authorize for request 3
> > >  modcall[authorize]: module "preprocess" returns ok for request 3
> > >  modcall[authorize]: module "chap" returns noop for request 3
> > >  modcall[authorize]: module "mschap" returns noop for request 3
> > >    rlm_realm: No '@' in User-Name = "raduser", looking up realm NULL
> > >    rlm_realm: No such realm "NULL"
> > >  modcall[authorize]: module "suffix" returns noop for request 3
> > >  rlm_eap: No EAP-Message, not doing EAP
> > >  modcall[authorize]: module "eap" returns noop for request 3
> > >    users: Matched entry DEFAULT at line 154
> > >  modcall[authorize]: module "files" returns ok for request 3
> > >modcall: leaving group authorize (returns ok) for request 3
> > >  rad_check_password:  Found Auth-Type ntlm_auth
> > >auth: type "ntlm_auth"
> > >  Processing the authenticate section of radiusd.conf
> > >modcall: entering group authenticate for request 3
> > >radius_xlat: Running registered xlat function of module mschap for
> > >string 'User-Name'
> > >radius_xlat:  '--username=raduser'
> > >radius_xlat:  '--password=radpass'
> > >  modcall[authenticate]: module "ntlm_auth" returns ok for request 3
> > >modcall: leaving group authenticate (returns ok) for request 3
> > >Sending Access-Accept of id 100 to 127.0.0.1 port 32779
> > >Finished request 3
> > >Going to the next request
> > >--- Walking the entire request list ---
> > >Waking up in 6 seconds...
> > >--- Walking the entire request list ---
> > >Cleaning up request 3 ID 100 with timestamp 4631d1f0
> > >Nothing to do.  Sleeping until we see a request.
> > >****************************************************************************************************
> > >
> > >On 4/27/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> > >> Error seems to be because shared secret is testing123 not testing 123.
> > >> But you need to paste output od radiusd-X after Access-Request. Open two
> > >> ssh sessions and do radtest from one and radiusd -X from the other.
> > >>
> > >> Ivan Kalik
> > >> Kalik Informatika ISP
> > >>
> > >>
> > >> Dana 27/4/2007, "shrikant Bhat" <[EMAIL PROTECTED]> pi e:
> > >>
> > >> >I get this error
> > >> >[EMAIL PROTECTED] ~]# radtest raduser radpass localhost 0 testing 123
> > >> >Sending Access-Request of id 47 to 127.0.0.1 port 1812
> > >> >        User-Name = "raduser"
> > >> >        User-Password = "radpass"
> > >> >        NAS-IP-Address = 255.255.255.255
> > >> >        NAS-Port = 0
> > >> >        Framed-Protocol = PPP
> > >> >rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=47, 
> > >> >length=20
> > >> >rad_verify: Received Access-Accept packet from client 127.0.0.1 port
> > >> >1812 with invalid signature (err=2)!  (Shared secret is incorrect.)
> > >> >
> > >> >On 4/27/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> > >> >> And what happens when you get Access-Request?
> > >> >>
> > >> >>
> > >> >> Dana 27/4/2007, "shrikant Bhat" <[EMAIL PROTECTED]> pi e:
> > >> >>
> > >> >> >Hello Alan,
> > >> >> >I have built and installed 1.1.6 version of FreeRadius. When I test
> > >> >> >using radtest it authenticates any user with any pasword, what I mean
> > >> >> >by this is it doesnt seem to contact the ADS to lookup the user
> > >> >> >information and authenticate. I have attached the debug
> > >> >> >*****************************************************************************************************
> > >> >> >[EMAIL PROTECTED] raddb]# /usr/local/sbin/radiusd -X
> > >> >> >Starting - reading configuration files ...
> > >> >> >reread_config:  reading radiusd.conf
> > >> >> >Config:   including file: /etc/raddb/clients.conf
> > >> >> >Config:   including file: /etc/raddb/snmp.conf
> > >> >> >Config:   including file: /etc/raddb/eap.conf
> > >> >> >Config:   including file: /etc/raddb/sql.conf
> > >> >> > main: prefix = "/usr"
> > >> >> > main: localstatedir = "/var"
> > >> >> > main: logdir = "/var/log/radius"
> > >> >> > main: libdir = "/usr/lib"
> > >> >> > main: radacctdir = "/var/log/radius/radacct"
> > >> >> > main: hostname_lookups = no
> > >> >> > main: max_request_time = 30
> > >> >> > main: cleanup_delay = 5
> > >> >> > main: max_requests = 1024
> > >> >> > main: delete_blocked_requests = 0
> > >> >> > main: port = 0
> > >> >> > main: allow_core_dumps = no
> > >> >> > main: log_stripped_names = no
> > >> >> > main: log_file = "/var/log/radius/radius.log"
> > >> >> > main: log_auth = no
> > >> >> > main: log_auth_badpass = no
> > >> >> > main: log_auth_goodpass = no
> > >> >> > main: pidfile = "/var/run/radiusd/radiusd.pid"
> > >> >> > main: user = "radiusd"
> > >> >> > main: group = "radiusd"
> > >> >> > main: usercollide = no
> > >> >> > main: lower_user = "no"
> > >> >> > main: lower_pass = "no"
> > >> >> > main: nospace_user = "no"
> > >> >> > main: nospace_pass = "no"
> > >> >> > main: checkrad = "/usr/sbin/checkrad"
> > >> >> > main: proxy_requests = yes
> > >> >> > security: max_attributes = 200
> > >> >> > security: reject_delay = 1
> > >> >> > security: status_server = no
> > >> >> > main: debug_level = 0
> > >> >> >read_config_files:  reading dictionary
> > >> >> >read_config_files:  reading naslist
> > >> >> >Using deprecated naslist file.  Support for this will go away soon.
> > >> >> >read_config_files:  reading clients
> > >> >> >read_config_files:  reading realms
> > >> >> >radiusd:  entering modules setup
> > >> >> >Module: Library search path is /usr/lib
> > >> >> >Module: Loaded expr
> > >> >> >Module: Instantiated expr (expr)
> > >> >> >Module: Loaded exec
> > >> >> > exec: wait = no
> > >> >> > exec: program = "/usr/bin/ntlm_auth  --request-nt-key
> > >> >> >--domain=MYDOMAIN.COM --username=%{mschap:User-Name}
> > >> >> >--password=%{User-Password}"
> > >> >> > exec: input_pairs = "request"
> > >> >> > exec: output_pairs = "(null)"
> > >> >> > exec: packet_type = "(null)"
> > >> >> >Module: Instantiated exec (ntlm_auth)
> > >> >> >Module: Loaded CHAP
> > >> >> >Module: Instantiated chap (chap)
> > >> >> >Module: Loaded preprocess
> > >> >> > preprocess: huntgroups = "/etc/raddb/huntgroups"
> > >> >> > preprocess: hints = "/etc/raddb/hints"
> > >> >> > preprocess: with_ascend_hack = no
> > >> >> > preprocess: ascend_channels_per_line = 23
> > >> >> > preprocess: with_ntdomain_hack = no
> > >> >> > preprocess: with_specialix_jetstream_hack = no
> > >> >> > preprocess: with_cisco_vsa_hack = no
> > >> >> >Module: Instantiated preprocess (preprocess)
> > >> >> >Module: Loaded MS-CHAP
> > >> >> > mschap: use_mppe = yes
> > >> >> > mschap: require_encryption = no
> > >> >> > mschap: require_strong = no
> > >> >> > mschap: with_ntdomain_hack = yes
> > >> >> > mschap: passwd = "(null)"
> > >> >> > mschap: authtype = "MS-CHAP"
> > >> >> > mschap: ntlm_auth = "(null)"
> > >> >> >Module: Instantiated mschap (mschap)
> > >> >> >Module: Loaded realm
> > >> >> > realm: format = "suffix"
> > >> >> > realm: delimiter = "@"
> > >> >> > realm: ignore_default = no
> > >> >> > realm: ignore_null = no
> > >> >> >Module: Instantiated realm (suffix)
> > >> >> >Module: Loaded eap
> > >> >> > eap: default_eap_type = "md5"
> > >> >> > eap: timer_expire = 60
> > >> >> > eap: ignore_unknown_eap_types = no
> > >> >> > eap: cisco_accounting_username_bug = no
> > >> >> >rlm_eap: Loaded and initialized type md5
> > >> >> >rlm_eap: Loaded and initialized type leap
> > >> >> > gtc: challenge = "Password: "
> > >> >> > gtc: auth_type = "PAP"
> > >> >> >rlm_eap: Loaded and initialized type gtc
> > >> >> > mschapv2: with_ntdomain_hack = no
> > >> >> >rlm_eap: Loaded and initialized type mschapv2
> > >> >> >Module: Instantiated eap (eap)
> > >> >> >Module: Loaded files
> > >> >> > files: usersfile = "/etc/raddb/users"
> > >> >> > files: acctusersfile = "/etc/raddb/acct_users"
> > >> >> > files: preproxy_usersfile = "/etc/raddb/preproxy_users"
> > >> >> > files: compat = "cistron"
> > >> >> >[/etc/raddb/users]:1 Cistron compatibility checks for entry raduser 
> > >> >> >...
> > >> >> >[/etc/raddb/users]:153 Cistron compatibility checks for entry 
> > >> >> >DEFAULT ..
> > >> >> >?Changing 'Auth-Type =' to 'Auth-Type +='
> > >> >> >[/etc/raddb/users]:172 Cistron compatibility checks for entry 
> > >> >> >DEFAULT ..
> > >> >> >[/etc/raddb/users]:184 Cistron compatibility checks for entry 
> > >> >> >DEFAULT ..
> > >> >> >[/etc/raddb/users]:191 Cistron compatibility checks for entry 
> > >> >> >DEFAULT ..
> > >> >> >[/etc/raddb/users]:198 Cistron compatibility checks for entry 
> > >> >> >DEFAULT ..
> > >> >> >Module: Instantiated files (files)
> > >> >> >Module: Loaded Acct-Unique-Session-Id
> > >> >> > acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
> > >> >> >Client-IP-Address, NAS-Port"
> > >> >> >Module: Instantiated acct_unique (acct_unique)
> > >> >> >Module: Loaded detail
> > >> >> > detail: detailfile =
> > >> >> >"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
> > >> >> > detail: detailperm = 384
> > >> >> > detail: dirperm = 493
> > >> >> > detail: locking = no
> > >> >> >Module: Instantiated detail (detail)
> > >> >> >Module: Loaded System
> > >> >> > unix: cache = no
> > >> >> > unix: passwd = "(null)"
> > >> >> > unix: shadow = "/etc/shadow"
> > >> >> > unix: group = "(null)"
> > >> >> > unix: radwtmp = "/var/log/radius/radwtmp"
> > >> >> > unix: usegroup = no
> > >> >> > unix: cache_reload = 600
> > >> >> >Module: Instantiated unix (unix)
> > >> >> >Module: Loaded radutmp
> > >> >> > radutmp: filename = "/var/log/radius/radutmp"
> > >> >> > radutmp: username = "%{User-Name}"
> > >> >> > radutmp: case_sensitive = yes
> > >> >> > radutmp: check_with_nas = yes
> > >> >> > radutmp: perm = 384
> > >> >> > radutmp: callerid = yes
> > >> >> >Module: Instantiated radutmp (radutmp)
> > >> >> >Listening on authentication *:1812
> > >> >> >Listening on accounting *:1813
> > >> >> >Ready to process requests.
> > >> >> >***********************************************************************
> > >> >> >Thanks
> > >> >> >SB
> > >> >> >
> > >> >> >On 4/23/07, Alan DeKok <[EMAIL PROTECTED]> wrote:
> > >> >> >> shrikant Bhat wrote:
> > >> >> >> > 1.The document says  adding exec ... to the modules section and 
> > >> >> >> > then
> > >> >> >> > listing ntlm_auth in the authenticate section. when I have exec
> > >> >> >> > ntlm_auth in modules section and ntlm_auth listed in authenticate
> > >> >> >> > section I get 'Unknown Auth-Type "exec" in authenticate section'
> > >> >> >> > error
> > >> >> >> > how do I fix this? please help.
> > >> >> >> > I have attached my radiusd.conf file.
> > >> >> >>
> > >> >> >>   All I know is that it works for me in 1.1.6.
> > >> >> >>
> > >> >> >> > 2. To authenticate cisco telnet sessions, is it possible to use
> > >> >> >> > freeRadius with AD integration
> > >> >> >> > what I mean by this is can I telnet using my ad ID and password 
> > >> >> >> > with
> > >> >> >> > freeRadius being authentication server?
> > >> >> >>
> > >> >> >>   Yes.
> > >> >> >>
> > >> >> >>   Alan DeKok.
> > >> >> >> --
> > >> >> >>   http://deployingradius.com       - The web site of the book
> > >> >> >>   http://deployingradius.com/blog/ - The blog
> > >> >> >> -
> > >> >> >> List info/subscribe/unsubscribe? See 
> > >> >> >> http://www.freeradius.org/list/users.html
> > >> >> >>
> > >> >> >-
> > >> >> >List info/subscribe/unsubscribe? See 
> > >> >> >http://www.freeradius.org/list/usershtml
> > >> >> >
> > >> >> >
> > >> >>
> > >> >> -
> > >> >> List info/subscribe/unsubscribe? See 
> > >> >> http://www.freeradius.org/list/users.html
> > >> >>
> > >> >
> > >> >-
> > >> >List info/subscribe/unsubscribe? See 
> > >> >http://www.freeradius.org/list/usershtml
> > >> >
> > >> >
> > >>
> > >> -
> > >> List info/subscribe/unsubscribe? See 
> > >> http://www.freeradius.org/list/users.html
> > >>
> > >
> > >-
> > >List info/subscribe/unsubscribe? See 
> > >http://www.freeradius.org/list/users.html
> > >
> > >
> >
> > -
> > List info/subscribe/unsubscribe? See 
> > http://www.freeradius.org/list/users.html
> >
>

- 
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Reply via email to