Dear all, For serial port redirection, one of our test cases is briefed below: 1. connect Windows 7 and Ubuntu 14.04.2 LTS with a serial cable having USB serial adapters on both ends, 2. install Realterm_2.0.0.70 on both Windows 7 and Windows 8.1, 3. run freerdp-2.0.0-rc0 on Ubuntu 14.04.2 LTS with command: xfreerdp /f /serial:COM4,/dev/ttyUSB0 +fonts /cert-ignore /d:win8_domain /u:win8_user /p:win8_pswd /v:win8_host 4. run Realterm_2.0.0.70 on Windows 8.1 with settings as: Port - Port=4, click "Open" Capture - File=dest_file, click "Start Overwrite", 5. run Realterm_2.0.0.70 on Windows 7 with settings as: Port - Port=3, click "Open" Send - Dump File to Port=src_file, click "Send File"
It works fine for FreeRDP-stable-1.1 but fails for freerdp-2.0.0-rc0 at step 4 while clicking "Open". Could someone help to look into it? Thanks, Irene ________________________________ This e-mail transmission is intended only for the use of the individual or entity to which it is addressed, and may contain Leadtek and/or its affiliated comoanies’ information that is privileged, confidential and exempted from disclosure under applicable law. If you have received this transmission by mistake, please notify us immediately and return the original message to us at the above address. If the reader is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. We greatly appreciate your cooperation. 本信件僅授權原發信人指定之收信人取閱之用,信件中可能含有麗臺科技以及/或其關係企業所擁有之機密性資訊,如果您並非被指定之收信人或在任何未經授權的情形之下收到本信件,煩請您立即告知原發信人並將此信件從電腦與網路伺服器中予以消除。請注意：任何未經授權而擅自使用此信件所含之機密資訊的行為是被嚴格禁止的,謝謝您的合作。 ________________________________ ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ FreeRDP-devel mailing list FreeRDP-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freerdp-devel
