you are putting in the dial string wrong and we are not taint checking it. Try openzap/1/a/0123 meaning span 1, any channel, dest 0123
we think you want span 123 and we didnt check for it being too big On Wed, May 21, 2008 at 10:07 AM, Helmut Kuper <[EMAIL PROTECTED]> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hello, > > I compiled wanpipe now with compilation mode 6 (freeswitch Default). > > wanpipe1.conf is now: > > # WANPIPE1 Configuration File > #================================================ > # > # Date: Wed Dec 6 20:29:03 UTC 2006 > # > # Note: This file was generated automatically > # by /usr/local/sbin/setup-sangoma program. > # > # If you want to edit this file, it is > # recommended that you use wancfg program > # to do so. > #================================================ > # Sangoma Technologies Inc. > #================================================ > > [devices] > wanpipe1 = WAN_AFT_TE1, Comment > > [interfaces] > w1g1 = wanpipe1, , TDM_VOICE_API, Comment > > [wanpipe1] > CARD_TYPE = AFT > S514CPU = A > CommPort = PRI > AUTO_PCISLOT = NO > PCISLOT = 8 > PCIBUS = 2 > FE_MEDIA = E1 > FE_LCODE = HDB3 > FE_FRAME = CRC4 > FE_LINE = 1 > TE_CLOCK = NORMAL > TE_REF_CLOCK = 0 > TE_SIG_MODE = CCS > TE_HIGHIMPEDANCE = NO > LBO = 120OH > FE_TXTRISTATE = NO > MTU = 1500 > UDPPORT = 9000 > TTL = 255 > IGNORE_FRONT_END = NO > TDMV_SPAN = 1 > TDMV_DCHAN = 16 > TDMV_HW_DTMF = NO > > [w1g1] > ACTIVE_CH = ALL > TDMV_ECHO_OFF = NO > TDMV_HWEC = NO > MTU = 80 > > openzap.conf.xml is now: > <configuration name="openzap.conf" description="OpenZAP Configuration"> > ~ <settings> > ~ <param name="debug" value="7"/> > ~ </settings> > ~ <pri_spans> > ~ <span id="1"> > ~ <param name="mode" value="user"/> > ~ <param name="dialect" value="euro"/> > ~ <param name="dialplan" value="XML"/> > ~ <param name="context" value="default"/> > ~ </span> > ~ </pri_spans> > ~ </configuration> > > openzap.conf is now: > [span wanpipe] > trunk_type => e1 > b-channel => 1:1-15,1:17-31 > d-channel=> 1:16 > > > /dev/zap/ctl and wptdm_* devices were created. > > I recompiled FS with "make current". FS starts up with no errors. > Openzap device were successfully configured. > > Dialplan is still: > > <extension name="outgoing-pstn"> > ~ <condition field="destination_number" expression="^0([0-9]+)$"> > ~ <action application="set" data="dialed_ext=$1"/> > ~ <action application="bridge" data="openzap/${dialed_ext}"/> > ~ </condition> > ~ </extension> > > > Call to 0XXXX leads still to segfault. > > Program terminated with signal 11, Segmentation fault. > #0 0xa3d5c465 in zap_channel_open_any (span_id=123, > direction=ZAP_TOP_DOWN, caller_data=0x9f8e2ed8, zchan=0x9f8e2ed4) at > src/zap_io.c:721 > 721 if (globals.spans[span_id].active_count >= > globals.spans[span_id].chan_count) { > (gdb) bt > #0 0xa3d5c465 in zap_channel_open_any (span_id=123, > direction=ZAP_TOP_DOWN, caller_data=0x9f8e2ed8, zchan=0x9f8e2ed4) at > src/zap_io.c:721 > #1 0xa3d576e2 in channel_outgoing_channel (session=0x81c61b8, > var_event=0x80e7798, outbound_profile=0x81d2008, new_session=0x9f8e6e24, > ~ pool=0x9f8e6e18, flags=SOF_NONE) at mod_openzap.c:906 > #2 0xb7e9c083 in switch_core_session_outgoing_channel > (session=0x81c61b8, var_event=0x80e7798, endpoint_name=0x81d5ab8 "openzap", > ~ caller_profile=0x81d1ee8, new_session=0x9f8e6e24, pool=0x9f8e6e18, > flags=SOF_NONE) at src/switch_core_session.c:252 > #3 0xb7ebc153 in switch_ivr_originate (session=0x81c61b8, > bleg=0x9f8e70f0, cause=0x9f8e70ec, bridgeto=0x81d4c48 "openzap/0123", > ~ timelimit_sec=60, table=0x0, cid_name_override=0x0, > cid_num_override=0x0, caller_profile_override=0x0, flags=<value > optimized out>) > ~ at src/switch_ivr_originate.c:824 > #4 0xa2cbc0e5 in audio_bridge_function (session=0x81c61b8, > data=0x81d4c48 "openzap/0123") at mod_dptools.c:1753 > #5 0xb7e99a35 in switch_core_session_exec (session=0x81c61b8, > application_interface=0x81244c8, arg=0x81d4c48 "openzap/0123") > ~ at src/switch_core_session.c:1045 > #6 0xb7e99e8c in switch_core_session_execute_application > (session=0x81c61b8, app=0x81d1e20 "bridge", arg=0x81d1e28 > "openzap/${dialed_ext}") > ~ at src/switch_core_session.c:1003 > #7 0xb7e9e0f4 in switch_core_session_run (session=0x81c61b8) at > src/switch_core_state_machine.c:144 > #8 0xb7e9ae75 in switch_core_session_thread (thread=0x81c58a0, > obj=0x81c61b8) at src/switch_core_session.c:734 > #9 0xb7ef0b36 in dummy_worker (opaque=0x81c58a0) at > threadproc/unix/thread.c:138 > #10 0xb7e0b31b in start_thread () from /lib/tls/i686/cmov/libpthread.so.0 > #11 0xb7d5157e in clone () from /lib/tls/i686/cmov/libc.so.6 > > > Any ideas? > > regards > helmut > > > > Anthony Minessale schrieb: > | I thought I already explained this. > | > | > | You have to choose between setting up wanpipe for ZAPTEL or wanpipe in > | standalone mode. > | > | when you set it up for ZAPTEL then you forget all about wanpipe in > OPENZAP > | and just treat it like a zaptel span. > | > | when you set it up in standalone mode, you need to configure > wanpipe1.conf > | for TDM_VOICE_API and all the proper settings for an E1. > | > | > | You keep doing mixtures of the above when it's one of the other you must > | choose. > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.8 (MingW32) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org > > iEYEARECAAYFAkg0OrIACgkQ4tZeNddg3dx7jACfcLVuFZ4ruKy6HbOnfD8TFa/n > mAoAnjzwYWFJP5UzTWxIt5Y1809B9L59 > =AlHg > -----END PGP SIGNATURE----- > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:[EMAIL PROTECTED] <[EMAIL PROTECTED]> GTALK/JABBER/PAYPAL:[EMAIL PROTECTED]<[EMAIL PROTECTED]> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:[EMAIL PROTECTED] <[EMAIL PROTECTED]> iax:[EMAIL PROTECTED]/888 googletalk:[EMAIL PROTECTED]<[EMAIL PROTECTED]> pstn:213-799-1400
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org