> Try a sleep after the answer. Will do ... just curious as to why and for how long?
>> 1) When I dial the extension from a Grandstream GXP-2000 ... >> How do I configure FreeSWITCH to send both RTP digits and inband audio? > The VoIP phone has no reason to reproduce any DTMF. I understand that the VoIP phone has no reason to create DTMF tones from the RTP digits sent by FreeSWITCH. What I was asking is how to you configure FreeSWITCH to generate inband DTMF tones in addition to the RTP digits. I.e. this particular phone can be configured to send DTMF digits to FreeSWITCH as any combination of inband audio, RTP digits, and / or SIP info. Going in the opposite direction I see where in the FreeSWITCH sofia xml configuration type you can set the dtmf-type as either rfc2833 or as SIP info however I don't see an option for using both nor do I see an option for generating inband DTMF audio. Note: I was just using send_dtmf with the VoIP phone for testing purposes ... this application doesn't actually need to send DTMF to a VoIP phone. >> 2) When I dial the extension from a FXO port on a Sangoma A204D it connects, > Is this using OpenZAP? Yes. In my particular application the System 25 PBX connects to FreeSWITCH using OpenZAP running on a Sangoma A204DX card. At the end of a call sent to voicemail I need FreeSWITCH to send some DTMF tones to the PBX in order to turn on / off the message waiting indicator. -- John ------------------------------------------------------------------------- | Feith Systems | Voice: 1-215-646-8000 | Email: [EMAIL PROTECTED] | | John Wehle | Fax: 1-215-540-5495 | | ------------------------------------------------------------------------- _______________________________________________ Freeswitch-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
