OK, thanks. I will get organised and try tomorrow. Thanks, Col ----- Original Message ----- From: Anthony Minessale To: [email protected] Sent: Tuesday, July 22, 2008 12:27 AM Subject: Re: [Freeswitch-users] OpenZap and tones.conf - FXO hangup problem
labbed up just means let us ssh to the box while you create the problem =D to get on irc go to our homepage and look for "join us on irc" on the right hand side of the page, make up a nick name and press the "join irc" button. Otherwise just get your own client and point it at irc.freedode.net channel #freeswitch We're here every day so whenever you feel like dropping by.... On Mon, Jul 21, 2008 at 9:26 AM, Col Ferguson <[EMAIL PROTECTED]> wrote: I'd love to, but I was up till 3 last night playing with it and wife is getting mad. I haven't tried anything apart from kewlstart as that works in asterisk. Also I have never used irc, and have no idea how to "lab it up". I'll have a go for a little while then will have to go to bed. See you on irc soon. Thanks, Col ----- Original Message ----- From: Anthony Minessale To: [email protected] Sent: Tuesday, July 22, 2008 12:10 AM Subject: Re: [Freeswitch-users] OpenZap and tones.conf - FXO hangup problem did you play around with the fxo types like kewlstart etc. maybe if you would like to join irc and lab it up for us, we can have a look at it on your box in real time. On Mon, Jul 21, 2008 at 9:10 AM, Col Ferguson <[EMAIL PROTECTED]> wrote: I'm using zaptel-1.4.9.2.xpp.r5566 (I had this downloaded already for an asterisk install). I tried 1.4.11 svn trunk initially, but changed to 1.4.9.2 in case it was something to do with the svn trunk code. I have another box with asterisk 1.4.18.1 and zaptel 1.4.9.2.xpp.r5566 working fine. I am using freeswitch svn trunk, as I read somewhere in the user list archives that there were openzap fixes done recently. Any other info that may help ? Thanks, Col ----- Original Message ----- From: Anthony Minessale To: [email protected] Sent: Monday, July 21, 2008 11:31 PM Subject: Re: [Freeswitch-users] OpenZap and tones.conf - FXO hangup problem What driver are you using underneath for the FXO. On Mon, Jul 21, 2008 at 7:44 AM, Col Ferguson <[EMAIL PROTECTED]> wrote: Hello all, I have installed freeswitch and had a bit of a play over the last few days and have a question about the format of the tones.conf file for OpenZap. I have a Xorcom Astribank to play with at the moment and have it working mostly. I haven't done anything with the SIP part at all yet. My basic hurdle at the moment is detecting a hangup on an FXO port before any bridged FXS extensions answer. If I hangup the line I am ringing into, the FXS extension keeps on ringing, then when the FXS extension is answered it is bridged to the FXO port and I get a dialtone and access to the FXO PSTN line directly. I read a post that alluded to the possibility that having the wrong info in tones.conf may result in strange behaviour as openzap doesn't recognise tones correctly. I could be completely wrong, and often am, but thats always been a good way to learn stuff. I haven't been able to find any good info on the format of tones.conf, but have managed to work out a few things so far. I have this is tones.conf for au, and its loading properly, but I don't know what its doing exactly. [au] generate-dial => v=-7;%(1000,0,413,438) detect-dial => 413,438 generate-ring => v=-7;%(400,200,413,438);%(400,2000,413,438) detect-ring => 413,438 generate-busy => v=-7;%(375,375,425) detect-busy => 425 generate-attn => v=0;%(100,100,1400,2060,2450,2600) detect-attn => 1400,2060,2450,2600 generate-callwaiting-sas => v=0;%(300,0,440) detect-callwaiting-sas => 440 generate-callwaiting-cas => v=0;%(80,0,2750,2130) detect-callwaiting-cas => 2750,2130 detect-fail1 => 913.8 detect-fail2 => 1370.6 detect-fail3 => 776.7 Using the generate-ring line as an example generate-ring => v=-7;%(400,200,413,438);%(400,2000,413,438) I think that generate-ring is for generating the ring tone used internally by ring_ready (and probably other areas I haven't found/noticed yet) ; is a separator v=-7 probably sets a volume level ? %(400,200,413,438) 400 is the time for the tone to be on, 200 is the time for the tone to be off, 413 is the first tone played, 438 is the second tone played ? %(400,2000,413,438) 400 is the time for the tone to be on, 2000 is the time for the tone to be off, 413 is the first tone played, 438 is the second tone played ? (I found some code in switch.conf.xml that sets up ring tones that showed using the two lots of settings, and this sounds right for me in Australia. I got the freqs from a Sipura, asterisk source and a web site www.3amsystems.com) detect-ring is used to look for a specific tone ? So what then is the information in generate-attn => v=0;%(100,100,1400,2060,2450,2600) doing ? Also what are detect-fail1,2,3 for ? Is there anywhere to set a disconnect tone ? As far as I can tell, Australia uses the busy tone to indicate a hangup, which sometimes comes after a period of silence. In case I am completely off track my dialplan is below. All Zap channels are corresponding numbers, ie channel 1 is number 1 etc. Channel 1-8 are FXS, 9-14 ate FXS but input/outputs, 15-22 are FXS and 23-30 are FXO. This is from /usr/local/freeswitch/conf/dialplan/extensions/home.xml Please point out anything silly in here. <extension name="out-zap-channel-7"> <condition field="destination_number" expression="^(7)$"> <action application="ring_ready"/> <action application="bridge" data="openzap/7/1"/> </condition> </extension> <extension name="out-zap-channel-8"> <condition field="destination_number" expression="^(8)$"> <action application="ring_ready"/> <action application="bridge" data="openzap/8/1"/> </condition> </extension> <extension name="in-zap-channel-27"> <condition field="destination_number" expression="^(27)$"> <!--<action application="set" data="hangup_after_bridge=true"/>--> <!--Couldn't see a difference--> <!--<action application="set" data="effective_caller_id_name=6055 Line"/>--> <!--fiddling--> <!--<action application="set" data="effective_caller_id_number=6055"/>--> <!--fiddling--> <!--<action application="tone_detect" data="busy 425 r +5 hangup normal_clearing"/>--> <!--Really thought this might work--> <!--<action application="answer"/>--> <!--Tried a simple ivr and symptoms same. ivr bridges call--> <!--<action application="sleep" data="2000"/>--> <!--hangup incoming call before answering with FXS--> <!--<action application="ivr" data="coltect_ivr"/>--> <!--and FXS still rings--> <action application="bridge" data="openzap/8/1"/> <!--<action application="transfer" data="8"/> </condition> </extension> Thanks, Col _______________________________________________ Freeswitch-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:[EMAIL PROTECTED] GTALK/JABBER/PAYPAL:[EMAIL PROTECTED] IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:[EMAIL PROTECTED] iax:[EMAIL PROTECTED]/888 googletalk:[EMAIL PROTECTED] pstn:213-799-1400 _______________________________________________ Freeswitch-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ Freeswitch-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:[EMAIL PROTECTED] GTALK/JABBER/PAYPAL:[EMAIL PROTECTED] IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:[EMAIL PROTECTED] iax:[EMAIL PROTECTED]/888 googletalk:[EMAIL PROTECTED] pstn:213-799-1400 _______________________________________________ Freeswitch-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ Freeswitch-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:[EMAIL PROTECTED] GTALK/JABBER/PAYPAL:[EMAIL PROTECTED] IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:[EMAIL PROTECTED] iax:[EMAIL PROTECTED]/888 googletalk:[EMAIL PROTECTED] pstn:213-799-1400 _______________________________________________ Freeswitch-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ Freeswitch-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
