Hi, Nice work on mod_fax! I just tried sending myself a couple of faxes and they were received successfully. I even tried using tone_detect which correctly detected the fax machine and fired off rxfax.
I wanted to report back on a couple of issues: 1) Even though the spool dir is set to /tmp/, I called up rxfax with data="rxfax.tiff" and it saved it in /. Shouldn't it save it in the spool dir? 2) After receiving the fax, the channel is never hanged up. The tone_detect app even detects the busy tone (which calls the hangup application when it detects it) but it just sits there for a long time until I manually uuid_kill it. Log says: 2008-11-17 11:59:08 [DEBUG] switch_core_session.c:489 switch_core_session_perform_receive_message() Send signal OpenZAP/1:1/1 [BREAK] 2008-11-17 12:00:20 [DEBUG] mod_fax.c:163 phase_e_handler() ============================================================================== 2008-11-17 12:00:20 [DEBUG] mod_fax.c:170 phase_e_handler() Fax successfully received. 2008-11-17 12:00:20 [DEBUG] mod_fax.c:181 phase_e_handler() Remote station id: 2008-11-17 12:00:20 [DEBUG] mod_fax.c:182 phase_e_handler() Local station id: Home 2008-11-17 12:00:20 [DEBUG] mod_fax.c:183 phase_e_handler() Pages transferred: 1 2008-11-17 12:00:20 [DEBUG] mod_fax.c:184 phase_e_handler() Total fax pages: 1 2008-11-17 12:00:20 [DEBUG] mod_fax.c:185 phase_e_handler() Image resolution: 8031x3850 2008-11-17 12:00:20 [DEBUG] mod_fax.c:186 phase_e_handler() Transfer Rate: 9600 2008-11-17 12:00:20 [DEBUG] mod_fax.c:188 phase_e_handler() ECM status off 2008-11-17 12:00:20 [DEBUG] mod_fax.c:189 phase_e_handler() remote country: 2008-11-17 12:00:20 [DEBUG] mod_fax.c:190 phase_e_handler() remote vendor: 2008-11-17 12:00:20 [DEBUG] mod_fax.c:191 phase_e_handler() remote model: 2008-11-17 12:00:20 [DEBUG] mod_fax.c:193 phase_e_handler() ============================================================================== 2008-11-17 12:00:23 [DEBUG] switch_ivr_async.c:1228 tone_detect_callback() TONE busy DETECTED 2008-11-17 12:00:23 [DEBUG] switch_core_session.c:667 switch_core_session_queue_private_event() Send signal OpenZAP/1:1/1 [BREAK] ... time goes by ... show channels returns: FreeSWITCH>show channels uuid,created,created_epoch,name,state,cid_name,cid_num,ip_addr,dest,application,application_data,dialplan,context,read_codec,read_rate,write_codec,write_rate da211ab0-b4af-11dd-9b26-492b0027ea62,2008-11-17 11:58:46,1226930326,OpenZAP/1:1/1,CS_EXECUTE,OpenZAP,52174195,,inbound_fax,rxfax,rxfax.tiff,XML,internal,PCMU,8000,PCMU,8000 1 total. ... until I finally call: FreeSWITCH>uuid_kill da211ab0-b4af-11dd-9b26-492b0027ea62 +OK In the dialplan, right after calling rxfax I call the hangup application. Thanks to all involved for making FS, mod_fax, spandsp, etc! :) Any help on the above would be greatly appreciated. - Gonzalo
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
