A lot of the hardware has problems detecting hangups, and the OpenZap
drivers are not totally sorted yet. So I would be looking at
hardware/openzap issue, not FS.
Scott
Tomás wrote:
Hi all,
I'm configuring my home PBX using FreeSwitch. I'm using a X101P card
configured as FXO (conected to analog PSTN line) and I have several IP
phones and softphones conected to FreeSwitch.
I can call from an IP phone to other IP phone (the same with the
softphones) and also from an IP phone (or softphone) to an external
number thought PSTN.
When I call from an external analog phone to FreeSwitch, I bridge the
call to all internal IP phones and softphones and they ring, but the
problem is that when I hang up the call in the external phone, all
internal phones (IP phones and softphones) keeps ringing...
I'm pretty sure the problem is that FreeSwitch don't receive the hang
up, because I cann't see anything on the log.
I've also created my own tones.conf for my country (Spain) but I'm not
sure if it's ok (but I have the same problem with hang up)
I've googled the list, and I've found several people with a similar
problem but no solution...
That's my pastebin with the most importants printouts and config files:
http://pastebin.freeswitch.org/6822
Thank you very much in advance.
_______________________________________________
Freeswitch-users mailing list
[email protected]
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
_______________________________________________
Freeswitch-users mailing list
[email protected]
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
