Do you just specify g722 for the codec prefs on FS? I added the items below and have FS set to use g722. When I call, I see that the phone offers g722 and g711u and FS chooses g722. On the phone I see g722 as inbound and outbound, but I don't hear anything. I've tried speaker and handset and get nothing on either one. Also, the phone doesn't show packets increasing even though I can see FS is playing files. It is an IP600. I switch the Polycom to offer 711u first and then g722 and FS chooses 711u and works fine.
Jason Garland wrote: > Something like this might do it... ;) > > <?xml version="1.0" standalone="yes"?> > <!-- SIP Enable HD Audio(G.722) on non-HD Polycom Phones --> > <!-- Discovered by Cherebrum --> > <!-- $RCSfile: hdaudio.cfg,v $ $Revision: 1.0 $ --> > <hdaudio> > <voice> > <codecs> > <preferences voice.codecPref.Lin16="5" voice.codecPref.G722="1" > voice.codecPref.G711Mu="2" voice.codecPref.G711A="3" > voice.codecPref.G729AB="4" voice.codecPref.IP_300.G711Mu="1" > voice.codecPref.IP_300.G711A="2" voice.codecPref.IP_300.G729AB="3" > voice.codecPref.IP_4000.G711Mu="1" voice.codecPref.IP_4000.G711A="2" > voice.codecPref.IP_4000.G729AB="" voice.codecPref.IP_650.G711Mu="2" > voice.codecPref.IP_650.G711A="3" voice.codecPref.IP_650.G729AB="4" > voice.codecPref.IP_650.Lin16="5" voice.codecPref.IP_650.G722="1"/> > <profiles voice.audioProfile.G711Mu.payloadSize="20" > voice.audioProfile.G711Mu.jitterBufferMin="40" > voice.audioProfile.G711Mu.jitterBufferShrink="500" > voice.audioProfile.G711Mu.jitterBufferMax="160" > voice.audioProfile.G711A.payloadSize="20" > voice.audioProfile.G711A.jitterBufferMin="40" > voice.audioProfile.G711A.jitterBufferShrink="500" > voice.audioProfile.G711A.jitterBufferMax="160" > voice.audioProfile.G729AB.payloadSize="20" > voice.audioProfile.G729AB.jitterBufferMin="40" > voice.audioProfile.G729AB.jitterBufferShrink="500" > voice.audioProfile.G729AB.jitterBufferMax="160" > voice.audioProfile.G722.payloadSize="20" > voice.audioProfile.G722.jitterBufferMin="40" > voice.audioProfile.G722.jitterBufferShrink="500" > voice.audioProfile.G722.jitterBufferMax="160" > voice.audioProfile.Lin16.payloadSize="10" > voice.audioProfile.Lin16.jitterBufferMin="20" > voice.audioProfile.Lin16.jitterBufferShrink="500" > voice.audioProfile.Lin16.jitterBufferMax="100" > voice.audioProfile.Lin16.frequency="160 00" voice.audioProfile.Lin16.payloadType="117"/> > </codecs> > <handset voice.handset.wideband="1"/> > </voice> > </hdaudio> > > > > On Tue, Jan 27, 2009 at 2:17 PM, [email protected] > <mailto:[email protected]> <[email protected] > <mailto:[email protected]>> wrote: > > > Codec Options* > > G.711 Codec, G.726, G.729AB, G.723.1A, G.722 wideband codec > > > > Speex is not listed, so Polycom can't do Speex. > > > > I should note that even the non-HD Polycom phones have this same chip > > and are capable of doing G.722 some some config tweaking. ;) > > Are you saying that you have actually gotten the non-HD versions to do > g.722? Or are you saying that one might be able to do this? If the > former, can you share what you did? > > _______________________________________________ > Freeswitch-users mailing list > [email protected] > <mailto:[email protected]> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Freeswitch-users mailing list > [email protected] > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org _______________________________________________ Freeswitch-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
