Hi John, I've been trying to get your mod_xml_ldap module running, but didn't get very far yet..
What is the official way to get the module built ? I tried modifying trunk/freeswitch.spec so that XML_INT_MODULES contains xml_int/mod_xml_ldap There's also a directories/mod_ldap in DISABLED_MODULES in the same file, but I don't suppose it's necessary to enable it, or is it ? The mod_xml_ldap doesn't get built by running make make or dpkg- buildpackage from trunk/ Also I tried building it from the module directory itself, but then I get the following error: fsbuil...@sv:~/trunk/src/mod/xml_int/mod_xml_ldap$ make Compiling mod_xml_ldap.c... cc1: warnings being treated as errors mod_xml_ldap.c: In function 'xml_ldap_search': mod_xml_ldap.c:356: warning: cast from pointer to integer of different size make[1]: *** [mod_xml_ldap.o] Error 1 make: *** [all] Error 1 (Also I had to apt-get install libsasl2 libsasl2-dev, otherwise make from this dir errored with missing sasl/sasl.h) Can you see what I'm doing wrong ? (I'm using svn rev 11560) thanks & regards, Leon On Jan 6, 2009, at 4:55 AM, John Skopis (Lists) wrote: > Vinicius Kobashi wrote: >> hi ppl. >> >> i tried hard to make it work, but still i couldnt find a complete >> openldap scheme that provides these information, and i still could't >> find out where to put these configuration... >> >> can anyone help me? >> >> thankz! >> >> vinicius escreveu: >>> thankz! >>> >>> ill set my openldap to provide these information.. >>> >>> but these about these binding settings... where should i set them? >>> >>> best regards >>> >>> John Skopis (Lists) wrote: >>>> vinicius wrote: >>>> >>>>> hi ppl.. i tried to find something at google, but i couldnt >>>>> manage to find >>>>> anything. >>>>> i still dont know what to do to make the mod_xml_ldap work. >>>>> i couldnt find information about how to build a config file for >>>>> the >>>>> module, and where to store it... >>>>> >>>>> can anyone give me a help? >>>>> >>>>> >>>> >>>> Be advised mod_xml_ldap is probably not production quality and will >>>> undoubtedly change, eventually at least. >>>> >>>> Here is what I used once: >>>> >>>> <bindings> >>>> >>>> >>>> <binding name="directory"> >>>> <!--%s is populated with the extension --> >>>> <param name="filter" value="(FSid=%s)" bindings="directory"/> >>>> <!--basedn for the searches %s is replaced with domain--> >>>> <param name="basedn" value="ou=people,dc=example" /> >>>> <param name="url" value="ldap://172.16.75.129"; /> >>>> <param name="binddn" value="cn=admin,dc=example" /> >>>> <param name="bindpass" value="secret" /> >>>> >>>> <trans> >>>> <!-- we need to translate these attrs into FS attrs --> >>>> <tran name="id" mapfrom="FSid" /> >>>> <tran name="mailbox" mapfrom="FSmailbox" /> >>>> <tran name="password" mapfrom="FSPassword" /> >>>> <tran name="vm-password" mapfrom="FSvm-password" /> >>>> <tran name="email-addr" mapfrom="FSemail-addr" /> >>>> <tran name="vm-email-all-messages" >>>> mapfrom="FSvm-email-all- >>>> messages" /> >>>> <tran name="vm-delete-file" mapfrom="FSvm-delete-file" >>>> /> >>>> <tran name="vm-attach-file" mapfrom="FSvm-attach-file" >>>> /> >>>> </trans> >>>> </binding> >>>> >>>> <binding name="configuration"> >>>> <param name="filter" value="(%s=%s)" >>>> bindings="configuration"/> >>>> <param name="basedn" value="name=%s,dc=example" /> >>>> <param name="url" value="ldap://172.16.75.129"; /> >>>> <param name="binddn" value="cn=admin,dc=example" /> >>>> <param name="bindpass" value="secret" /> >>>> </binding> >>>> </bindings> >>>> >>>> >>>> which should/probably/might work with ldap objects like these: >>>> >>>> dn: cn=John Skopis,ou=people,dc=example >>>> objectClass: person >>>> objectClass: inetOrgPerson >>>> objectClass: organizationalPerson >>>> objectClass: FreeSWITCH-Exten-Object >>>> objectClass: top >>>> cn: John Skopis >>>> sn: Skopis >>>> givenName: John >>>> FSid: 1001 >>>> FSmailbox: 1001 >>>> FSpassword: 1234 >>>> FSvm-password: 1001 >>>> FSemail-addr: [email protected] >>>> FSvm-email-all-messages: TRUE >>>> FSvm-delete-file: TRUE >>>> FSvm-attach-file: TRUE >>>> >>>> dn: SIPIdentityUserName=1001,ou=h350,dc=example >>>> objectClass: person >>>> objectClass: SIPIdentity >>>> objectClass: top >>>> cn: 1001 >>>> sn: 1001 >>>> SIPIdentitySIPURI: sip:[email protected] >>>> SIPIdentityRegistrarAddress: 172.16.75.128 >>>> SIPIdentityProxyAddress: 172.16.75.128 >>>> SIPIdentityPassword: 1234 >>>> SIPIdentityUserName: 1001 >>>> SIPIdentityServiceLevel: premium >>>> >>>> > > Again, the module is not production quality. Hopefully I will conjurer > the time and know-how to put something decent together eventually. > > To load configuration for any fs module you need to define the XML > configuration element under the section "configuration". > > A good starting point is the file > $PREFIX/conf/freeswitch.xml > > http://wiki.freeswitch.org/wiki/Freeswitch.xml > > Also take a look at $PREFIX/logs/freeswitch.xml.fsxml > > to load mod_xml_ldap you would need to add something like this to > modules.conf.xml > > <load module="mod_xml_ldap" /> > > and create an xml_ldap.conf.xml in > $PREFIX/autoload_configs/xml_ldap.conf.xml > > <configuration name="xml_ldap.conf"> > ... > </configuration> > > The ITU is doing some work called h.350: > http://www.itu.int/ITU-T/studygroups/com16/h350/index.html > > Here is what I was working with: > attributetype ( 1.3.6.1.4.1.65535.2.1.1 NAME 'FSid' > DESC 'FreeSWITCH Extension ID' > EQUALITY caseIgnoreIA5Match > SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) > > attributetype ( 1.3.6.1.4.1.65535.2.1.2 NAME 'FSmailbox' > DESC 'FreeSWITCH Extension Mailbox' > EQUALITY caseIgnoreIA5Match > SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) > > attributetype ( 1.3.6.1.4.1.65535.2.1.3 NAME 'FSpassword' > DESC 'FreeSWITCH Password' > EQUALITY caseExactIA5Match > SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 > SINGLE-VALUE ) > > attributetype ( 1.3.6.1.4.1.65535.2.1.4 NAME 'FSa1hash' > DESC 'FreeSWITCH Crypted Password' > EQUALITY caseExactIA5Match > SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 > SINGLE-VALUE ) > > attributetype ( 1.3.6.1.4.1.65535.2.1.5 NAME 'FSvm-password' > DESC 'FreeSWITCH VoiceMail Password' > EQUALITY integerMatch > SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 > SINGLE-VALUE ) > > attributetype ( 1.3.6.1.4.1.65535.2.1.6 NAME 'FSemail-addr' > DESC 'E-mail address to send voicemail' > EQUALITY caseIgnoreIA5Match > SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) > > attributetype ( 1.3.6.1.4.1.65535.2.1.7 NAME 'FSvm-email-all-messages' > DESC 'FreeSWITCH Email All Mesages' > EQUALITY booleanMatch > SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 > SINGLE-VALUE ) > > attributetype ( 1.3.6.1.4.1.65535.2.1.8 NAME 'FSvm-delete-file' > DESC 'FreeSWITCH VoiceMail Delete File' > EQUALITY booleanMatch > SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 > SINGLE-VALUE ) > > attributetype ( 1.3.6.1.4.1.65535.2.1.9 NAME 'FSvm-attach-file' > DESC 'FreeSWITCH VoiceMail Attach file' > EQUALITY booleanMatch > SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 > SINGLE-VALUE ) > > > > > > objectclass ( 1.3.6.1.4.1.65535.2.2.1 NAME 'FreeSWITCH-Exten-Object' > SUP top AUXILIARY > DESC '%obj_desc%' > MUST ( FSid $ FSpassword ) > MAY ( FSmailbox $ FSa1hash $ FSvm-password $ FSemail-addr $ > FSvm-email-all-messages $ FSvm-delete-file $ FSvm-attach-file ) ) > > hth > > _______________________________________________ > Freeswitch-users mailing list > [email protected] > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org _______________________________________________ Freeswitch-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
