On Jun 5, 2009, at 1:14 PM, Michael Collins wrote:
On Thu, Jun 4, 2009 at 6:59 PM, seven <[email protected]> wrote:
I'm using openzap analog with tone_detect, it works(conference not
tested). however, according to the asterisk book, Kewlstart can
detect the busy tone and disconnect the circuit. does anyone knows
how to configure kewlstart with freeswitch/openzap? guess we don't
need tone_detect then.
Dujinfang,
Your telco must support "kewlstart" signaling for this to be
effective. The telco probably calls it something different, like
"disconnect supervision" or "drop in loop current" or "battery
reversal" or something like that. In any case, if the signaling is
supported then you need to set up your zaptel.conf with the
appropriate signaling type, which is either fxoks or fxsks. (I can
never remember because zaptel does it backwards where if you have an
FXO port then it uses FXS signaling but if you have an FXS port it
uses FXO signaling. Stupidity, to be sure, so be aware of it.)
Find the sample zaptel.conf that comes with the zaptel package and
search it for fxsks or fxoks and you'll see some notes on how to set
it up for your analog trunks.
-MC
Thank you for the detailed explain MC. so the ks means kewlstart, it
already set, but no luck. anyway, the tone_detect works for me, less
worry about that.
Thanks again.
_______________________________________________
Freeswitch-users mailing list
[email protected]
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
_______________________________________________
Freeswitch-users mailing list
[email protected]
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
