Hello: I would like to connect a Sangoma T1 card to FreeSWITCH. Most of the docs I see pertain to a PRI. When I leave out the d-chan notation, I get errors regarding not able to get the d-chan up and running in the CLI.
Here's my info: [span wanpipe T1] trunk_type => t1 b-channel => 1:1-24 [span wanpipe T2] trunk_type => t1 b-channel => 2:1-24 ---- #================================================ # WANPIPE1 Configuration File #================================================ # # Date: Wed Dec 6 20:29:03 UTC 2006 # # Note: This file was generated automatically # by /usr/local/sbin/setup-sangoma program. # # If you want to edit this file, it is # recommended that you use wancfg program # to do so. #================================================ # Sangoma Technologies Inc. #================================================ [devices] wanpipe1 = WAN_AFT_TE1, Comment [interfaces] w1g1 = wanpipe1, , TDM_VOICE_API, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 1 PCIBUS = 6 FE_MEDIA = T1 FE_LCODE = B8ZS FE_FRAME = ESF FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 0DB FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 TDMV_HW_DTMF = YES TDMV_HW_FAX_DETECT = NO [w1g1] ACTIVE_CH = ALL TDMV_HWEC = YES MTU = 80 --- In freeSWITCH's openzap.conf.xml, I've tried pri_span as well as analog. I cannot find a straight up T1 wiki anywhere. Would someone please provide an example? Thanks, Kareem _______________________________________________ Freeswitch-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
