Of course – no problem! I’m not using libpri support now, I don’t think it’s ported for Windows (yet)?
I’ll try it out some more, and try to detect what’s going wrong... /Peter Från: Moises Silva [mailto:[email protected]] Skickat: den 12 augusti 2009 16:17 Till: [email protected] Kopia: Peter Olsson Ämne: Re: FW: Sangoma/FS... Hello Peter, I'd appreciate if you can keep the discussion going in the freeswitch-users mailing list, there are other people there that will benefit of the discussion or even can help. Read my comments below. On Wed, Aug 12, 2009 at 5:59 AM, Peter Olsson <[email protected]<mailto:[email protected]>> wrote: Sorry for spamming you :) But I have some more results now. I’ve tried using another lab PBX with Q.SIG enabled, and when using that one I’m able to connect calls as I should. At least incoming to FS, outgoing seem to have some problems still.. So the problem for the PBX I used yesterday seems to be both related to Q.SIG (maybe) and the PBX itself (it does connect to other providers though, so I know the trunk works). Should I take some dumps from the PRI card to try to find out why it didn’t work with the first one, or is this “as expected”, since they have Q.SIG enabled? I have no experience with Q.SIG, so I won't be able to help much. One thing though, is that if I were you, I'd be using openzap with libpri support, is that what you are using, or are you using the ISDN openzap stack? As of the dumps, they may help, or not, but pastebin them anyways so I can make an un-educated guess. -- Moises Silva Software Developer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. [email protected]<mailto:[email protected]> !DSPAM:4a82cefe32931477278362!
_______________________________________________ FreeSWITCH-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
