On Thu, Aug 13, 2009 at 2:35 AM, Timur Irmatov <[email protected]> wrote:
> Hi, > > > I am new to FreeSWITCH and need an advice. > > All calls to PSTN from our server will go through single gateway, > which is a soft switch supporting SIP protocol. FreeSWITCH will need > to register with soft switch, but soft switch permits only single > active call (in either direction) per registration. So we will need 10 > SIP accounts to allow 10 simultaneous connections. Are you going to have incoming calls as well? If so, how does the soft-switch handle two concurrent calls to the same number? > > > Question is - how should I configure FreeSWITCH for this scenario? I > see two options: > > 1) Create 10 gateways with different registrations, use mod_limit to > route only one outgoing call per gateway; > 2) Create 10 gateways with different registrations, use event socket > to route calls manually and monitor used lines (incoming and outgoing > calls through soft switch). > > Are there any other possibilities? Corrections/ suggestions are very > welcome. This seems like a serious defect in the soft-switch. I can understand if it allows you to specify only one call per SIP registration, but to hard-code that limit seems pretty silly. Can you find out more about the soft-switch in question and see if that limitation is flexible? -MC
_______________________________________________ FreeSWITCH-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
