That was it! I had been try to setup the conference java script example and I 
made an error in the conference-conf.xml. Thanks a lot to everyone!

Can somebody point me in the right direction to get my new T-1 taking to the 
Sangoma A101?

I have it installed and setup the Wanpipe driver off their site.

When I issue a wanrouter status it shows connected, an ifconfig shows RX and TX 
packets incrementing on the w1g1 interface.

This is the spec on the phone line:

LD T1 with ISDN, ESF, B8ZS, DTMF, ASCENDING HUNTING, PSEUDO ANI 417-862-4351, 
REAL TIME ANI, COS US 50 CA,
AND TO ADD 10 8XX #S TO POINT AT THE DS1 WITH NO DNIS.

Thanks again!

Mike







From: [email protected] 
[mailto:[email protected]] On Behalf Of Mathieu Rene
Sent: Tuesday, August 25, 2009 2:45 PM
To: [email protected]
Subject: Re: [Freeswitch-users] Moved Freeswitch to new subnet.

It means you have an error in your XML configuration. You can open 
/usr/local/freeswitch/log/freeswitch.xml.fsxml to figure out where it is (but 
do not modify this file, as it is generated from all the other xml files).

Mathieu Rene
Avant-Garde Solutions Inc
Office: + 1 (514) 664-1044 x100
Cell: +1 (514) 664-1044 x200
[email protected]<mailto:[email protected]>




On 25-Aug-09, at 3:41 PM, Mike Peace wrote:



OK,

Received a different error: Cannot Initialize [[error near line 294]: unclosed 
<!--]

?

From: 
[email protected]<mailto:[email protected]>
 [mailto:[email protected]] On Behalf Of Mathieu 
Rene
Sent: Tuesday, August 25, 2009 2:02 PM
To: 
[email protected]<mailto:[email protected]>
Subject: Re: [Freeswitch-users] Moved Freeswitch to new subnet.

You can start it without the -nc switch and it'll stay active on the current 
terminal so you can look for any errors.

Just do:

/usr/local/freeswitch/bin/freeswitch


Mathieu Rene
Avant-Garde Solutions Inc
Office: + 1 (514) 664-1044 x100
Cell: +1 (514) 664-1044 x200
[email protected]<mailto:[email protected]>



On 25-Aug-09, at 2:58 PM, Mike Peace wrote:



It was started from the services configuration window first and I still get the 
error. I set the service not to load rebooted then ran it from the prompt as 
you suggested. It stated "3585 Backgrounding" I then ran ps -eaf from the 
prompt and that PID didn't show up. Then when I attempted to run the fs_cli I 
received the same error as before  [ERROR] libs/esl/fs_cli.c.639 main() Error 
Connecting [Socket Connection Error]


From: 
[email protected]<mailto:[email protected]>
 [mailto:[email protected]] On Behalf Of Mathieu 
Rene
Sent: Tuesday, August 25, 2009 12:55 PM
To: 
[email protected]<mailto:[email protected]>
Subject: Re: [Freeswitch-users] Moved Freeswitch to new subnet.

It means freeswitch is not running. You need to start it with 
/usr/local/freeswitch/bin/freeswitch -nc

@MikeJ: Nice bash scripting :D

Mathieu Rene
Avant-Garde Solutions Inc
Office: + 1 (514) 664-1044 x100
Cell: +1 (514) 664-1044 x200
[email protected]<mailto:[email protected]>




On 25-Aug-09, at 1:53 PM, Mike Peace wrote:




Ok, figured out from your post to load the FS-CLI in order to run the Sophia 
status Michael mentioned.

Now I get: [ERROR] libs/esl/fs_cli.c.639 main() Error Connecting [Socket 
Connection Error] when running ./fs_cli from a terminal window in 
/usr/local/freeswitch/bin where fs_cli is located.

Mike
From: 
[email protected]<mailto:[email protected]>
 [mailto:[email protected]] On Behalf Of Michael 
Jerris
Sent: Tuesday, August 25, 2009 12:39 PM
To: 
[email protected]<mailto:[email protected]>
Subject: Re: [Freeswitch-users] Moved Freeswitch to new subnet.

if you want to run that at your prompt instead of at the fs_cli you can do this:

function sofia() { fs_cli -x "$(echo "sofia $@")"; }

(thanks ray for the bash foo)

Mike

On Aug 25, 2009, at 1:04 PM, Mike Peace wrote:





I get a bash: sofia: command not found. Is there something I need to add to my 
config to use these commands?

From: 
[email protected]<mailto:[email protected]>
 [mailto:[email protected]] On Behalf Of Michael 
Collins
Sent: Tuesday, August 25, 2009 10:55 AM
To: 
[email protected]<mailto:[email protected]>
Subject: Re: [Freeswitch-users] Moved Freeswitch to new subnet.

Hmm... can you fire up FS and then do "sofia status" and tell us if the 
internal profile looks okay? Also, do "sofia status profile internal" and 
capture the output. Something fishy is going on...
-MC

Mike Peace

Network Analyst

EDCO, The Document People

Direct 417-447-3367


________________________________

EDCO Group, Inc.
Phone: (800) 999-3456
Fax: (800) 999-3551
Web: http://www.edcogroupinc.com/

Confidentiality Notice: The information contained in this e-mail message 
(including any attachments) may contain confidential and privileged 
information, and is for the sole use of the intended recipient(s). If you are 
not the intended recipient, any unauthorized review, use, or disclosure or 
distribution is strictly prohibited. If you have received this message in 
error, please notify the sender by replying to this e-mail message or by 
telephone at (800) 999-3456 and permanently destroy all copies of the original 
message (including any attachments), along with any reply, and delete them from 
your system.

_______________________________________________
FreeSWITCH-users mailing list
[email protected]<mailto:[email protected]>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


________________________________

EDCO Group, Inc.
Phone: (800) 999-3456
Fax: (800) 999-3551
Web: http://www.edcogroupinc.com/

Confidentiality Notice: The information contained in this e-mail message 
(including any attachments) may contain confidential and privileged 
information, and is for the sole use of the intended recipient(s). If you are 
not the intended recipient, any unauthorized review, use, or disclosure or 
distribution is strictly prohibited. If you have received this message in 
error, please notify the sender by replying to this e-mail message or by 
telephone at (800) 999-3456 and permanently destroy all copies of the original 
message (including any attachments), along with any reply, and delete them from 
your system.

_______________________________________________
FreeSWITCH-users mailing list
[email protected]<mailto:[email protected]>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


________________________________

EDCO Group, Inc.
Phone: (800) 999-3456
Fax: (800) 999-3551
Web: http://www.edcogroupinc.com/

Confidentiality Notice: The information contained in this e-mail message 
(including any attachments) may contain confidential and privileged 
information, and is for the sole use of the intended recipient(s). If you are 
not the intended recipient, any unauthorized review, use, or disclosure or 
distribution is strictly prohibited. If you have received this message in 
error, please notify the sender by replying to this e-mail message or by 
telephone at (800) 999-3456 and permanently destroy all copies of the original 
message (including any attachments), along with any reply, and delete them from 
your system.

_______________________________________________
FreeSWITCH-users mailing list
[email protected]<mailto:[email protected]>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
EDCO Group, Inc.
Phone: (800) 999-3456
Fax:   (800) 999-3551
Web:   http://www.edcogroupinc.com/

Confidentiality Notice:  The information contained in this e-mail message 
(including any attachments) may contain confidential and privileged 
information, and is for the sole use of the intended recipient(s).  If you are 
not the intended recipient, any unauthorized review, use, or disclosure or 
distribution is strictly prohibited.  If you have received this message in 
error, please notify the sender by replying to this e-mail message or by 
telephone at (800) 999-3456 and permanently destroy all copies of the original 
message (including any attachments), along with any reply, and delete them from 
your system.
_______________________________________________
FreeSWITCH-users mailing list
[email protected]
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

Reply via email to