Hi, Tried setting PCMA as first parameter in vars.xml, no use. Still I got the same error.
Tried setting the absolute_codec_string to PCMA, but got the same error. But I tried with a another parameter in openzap.conf.xml, which I got from the following thread http://www.nabble.com/Problem-dialing-out-via-E1-to22479047.html#a22626383 <param name="l1" value="alaw"/> After that I was able to make outgoing call, with the dialplan that I've. But I don't know why setting PCMA has not worked. Have any guess??? I planned to document this in the wiki. I was struggling to originate a call from the CLI. originate openzap/1/1/9952248266 openzap/1/1/9952248266 says "No route. Aborting". Have to find a way for this. I sincerely thank you for your valuable time and effort on this matter. On Wed, Oct 14, 2009 at 11:33 AM, Michael Collins <[email protected]>wrote: > Lak, > > Okay, it stood out right away: FS is trying u-law but Asterisk is trying > A-law. I'm not sure where the codec for openzap gets selected but you can > try modifying this line in vars.xml: > > <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCMU,PCMA,GSM"/> > > Try putting PCMA first. Also, I've never tried this but perhaps in your > dialplan you can set absolute_codec_string to PCMA. I'm very interesting in > hearing about the results. Please try them as soon as you can and report > back. > > Thanks, > MC > > > On Tue, Oct 13, 2009 at 10:34 PM, lakshmanan ganapathy < > [email protected]> wrote: > >> Hi. I made the setup quickly with one of my colleague, and here is the >> debug log given by asterisk >> >> Steps done by me : >> + Call Made from 04443902743 to 04439114600 >> + When call lands to 04439114600, I just route it to 09176454982. >> >> >> *CLI> >> *CLI> >> *CLI> pri debug span 1 >> Enabled debugging on span 1 >> *CLI> >> *CLI> >> *CLI> >> *CLI> < Protocol Discriminator: Q.931 (8) len=41 >> < Call Ref: len= 2 (reference 21/0x15) (Originator) >> >> >> < Message type: SETUP (5) >> < [a1] >> < Sending Complete (len= 1) >> < [04 03 80 90 a3] >> < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer >> capability: Speech (0) >> < Ext: 1 Trans mode/rate: 64kbps, circuit-mode >> (16) >> >> >> < User information layer 1: A-Law (35) >> < [18 03 a1 83 9f] >> < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred >> Dchan: 0 >> < ChanSel: As indicated in following octets >> >> >> < Ext: 1 Coding: 0 Number Specified Channel Type: 3 >> < Ext: 1 Channel: 31 ] >> < [6c 0c 01 81 34 34 34 33 39 30 32 37 34 33] >> < Calling Number (len=14) [ Ext: 0 TON: Unknown Number Type (0) NPI: >> ISDN/Telephony Numbering Plan (E.164/E.163) (1) >> >> >> < Presentation: Presentation permitted, user >> number passed network screening (1) '4443902743' ] >> < [70 09 c1 33 39 31 31 34 36 30 30] >> < Called Number (len=11) [ Ext: 1 TON: Subscriber Number (4) NPI: >> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '39114600' ] >> >> >> -- Making new call for cr 21 >> -- Processing Q.931 Call Setup >> -- Processing IE 161 (cs0, Sending Complete) >> -- Processing IE 4 (cs0, Bearer Capability) >> -- Processing IE 24 (cs0, Channel Identification) >> -- Processing IE 108 (cs0, Calling Party Number) >> >> >> -- Processing IE 112 (cs0, Called Party Number) >> q931.c:3504 q931_receive: call 21 on channel 31 enters state 6 (Call Present) >> q931.c:2769 q931_call_proceeding: call 21 on channel 31 enters state 9 >> (Incoming Call Proceeding) >> >> > Protocol Discriminator: Q.931 (8) len=10 >> > Call Ref: len= 2 (reference 21/0x15) (Terminator) >> > Message type: CALL PROCEEDING (2) >> >> > [18 03 a9 83 9f] >> > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive >> > Dchan: 0 >> > ChanSel: As indicated in following octets >> >> > Ext: 1 Coding: 0 Number Specified Channel Type: 3 >> > Ext: 1 Channel: 31 ] >> >> -- Accepting call from '4443902743' to '39114600' on channel 0/31, span 1 >> -- Executing [39114...@incoming-from-pri:1] NoOp("Zap/31-1", "FMS Call >> Extn:39114600:| CID::| Channel:Zap/31-1:| ") in new stack >> >> >> -- Executing [39114...@incoming-from-pri:2] Dial("Zap/31-1", >> "Zap/g1/w09176454982||rj") in new stack >> -- Making new call for cr 32770 >> -- Requested transfer capability: 0x00 - SPEECH >> >> > Protocol Discriminator: Q.931 (8) len=43 >> > Call Ref: len= 2 (reference 2/0x2) (Originator) >> > Message type: SETUP (5) >> > [04 03 80 90 a3] >> > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer >> > capability: Speech (0) >> > Ext: 1 Trans mode/rate: 64kbps, circuit-mode >> > (16) >> >> > User information layer 1: A-Law (35) >> > [18 03 a9 83 81] >> > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive >> > Dchan: 0 >> >> > ChanSel: As indicated in following octets >> > Ext: 1 Coding: 0 Number Specified Channel Type: 3 >> > Ext: 1 Channel: 1 ] >> > [6c 0c 00 81 34 34 34 33 39 30 32 37 34 33] >> > Calling Number (len=14) [ Ext: 0 TON: Unknown Number Type (0) NPI: >> > Unknown Number Plan (0) >> >> > Presentation: Presentation permitted, user >> > number passed network screening (1) '4443902743' ] >> > [70 0c 80 30 39 31 37 36 34 35 34 39 38 32] >> > Called Number (len=14) [ Ext: 1 TON: Unknown Number Type (0) NPI: >> > Unknown Number Plan (0) '09176454982' ] >> >> q931.c:3087 q931_setup: call 32770 on channel 1 enters state 1 (Call >> Initiated) >> >> >> -- Called g1/w09176454982 >> q931.c:2797 q931_alerting: call 21 on channel 31 enters state 7 (Call >> Received) >> >> > Protocol Discriminator: Q.931 (8) len=9 >> > Call Ref: len= 2 (reference 21/0x15) (Terminator) >> > Message type: ALERTING (1) >> > [1e 02 81 88] >> > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: >> > 0 Location: Private network serving the local user (1) >> > Ext: 1 Progress Description: Inband >> > information or appropriate pattern now available. (8) ] >> >> < Protocol Discriminator: Q.931 (8) len=10 >> < Call Ref: len= 2 (reference 2/0x2) (Terminator) >> < Message type: CALL PROCEEDING (2) >> < [18 03 a9 83 81] >> < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive >> Dchan: 0 >> >> >> < ChanSel: As indicated in following octets >> < Ext: 1 Coding: 0 Number Specified Channel Type: 3 >> < Ext: 1 Channel: 1 ] >> -- Processing IE 24 (cs0, Channel Identification) >> >> >> q931.c:3636 q931_receive: call 32770 on channel 1 enters state 3 (Outgoing >> call Proceeding) >> -- Zap/1-1 is proceeding passing it to Zap/31-1 >> < Protocol Discriminator: Q.931 (8) len=13 >> < Call Ref: len= 2 (reference 2/0x2) (Terminator) >> >> >> < Message type: ALERTING (1) >> < [1e 02 84 88] >> < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: >> 0 Location: Public network serving the remote user (4) >> < Ext: 1 Progress Description: Inband >> information or appropriate pattern now available. (8) ] >> >> >> < [1e 02 84 82] >> < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: >> 0 Location: Public network serving the remote user (4) >> < Ext: 1 Progress Description: Called >> equipment is non-ISDN. (2) ] >> >> >> -- Processing IE 30 (cs0, Progress Indicator) >> -- Processing IE 30 (cs0, Progress Indicator) >> q931.c:3549 q931_receive: call 32770 on channel 1 enters state 4 (Call >> Delivered) >> -- Zap/1-1 is ringing >> < Protocol Discriminator: Q.931 (8) len=9 >> >> >> < Call Ref: len= 2 (reference 2/0x2) (Terminator) >> < Message type: PROGRESS (3) >> < [1e 02 84 84] >> < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: >> 0 Location: Public network serving the remote user (4) >> >> >> < Ext: 1 Progress Description: Unknown (4) ] >> -- Processing IE 30 (cs0, Progress Indicator) >> -- Zap/1-1 is making progress passing it to Zap/31-1 >> < Protocol Discriminator: Q.931 (8) len=9 >> >> >> < Call Ref: len= 2 (reference 2/0x2) (Terminator) >> < Message type: PROGRESS (3) >> < [1e 02 84 88] >> < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: >> 0 Location: Public network serving the remote user (4) >> >> >> < Ext: 1 Progress Description: Inband >> information or appropriate pattern now available. (8) ] >> -- Processing IE 30 (cs0, Progress Indicator) >> -- Zap/1-1 is making progress passing it to Zap/31-1 >> >> >> < Protocol Discriminator: Q.931 (8) len=19 >> < Call Ref: len= 2 (reference 2/0x2) (Terminator) >> < Message type: CONNECT (7) >> < [4c 0c 01 83 39 31 37 36 34 35 34 39 38 32] >> < Connected Number (len=14) [ Ext: 0 TON: Unknown Number Type (0) NPI: >> ISDN/Telephony Numbering Plan (E.164/E.163) (1) >> >> >> < Ext: 1 Presentation: Presentation allowed of >> network provided number (3) '9176454982' ] >> -- Processing IE 76 (cs0, Connected Number) >> q931.c:3579 q931_receive: call 32770 on channel 1 enters state 10 (Active) >> >> > Protocol Discriminator: Q.931 (8) len=5 >> > Call Ref: len= 2 (reference 2/0x2) (Originator) >> > Message type: CONNECT ACKNOWLEDGE (15) >> >> -- Zap/1-1 answered Zap/31-1 >> q931.c:2904 q931_connect: call 21 on channel 31 enters state 8 (Connect >> Request) >> >> > Protocol Discriminator: Q.931 (8) len=14 >> >> > Call Ref: len= 2 (reference 21/0x15) (Terminator) >> > Message type: CONNECT (7) >> > [18 03 a9 83 9f] >> > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive >> > Dchan: 0 >> > ChanSel: As indicated in following octets >> > Ext: 1 Coding: 0 Number Specified Channel Type: 3 >> > Ext: 1 Channel: 31 ] >> > [1e 02 81 82] >> > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: >> > 0 Location: Private network serving the local user (1) >> > Ext: 1 Progress Description: Called >> > equipment is non-ISDN. (2) ] >> >> -- Native bridging Zap/31-1 and Zap/1-1 >> < Protocol Discriminator: Q.931 (8) len=5 >> < Call Ref: len= 2 (reference 21/0x15) (Originator) >> < Message type: CONNECT ACKNOWLEDGE (15) >> >> >> q931.c:3664 q931_receive: call 21 on channel 31 enters state 10 (Active) >> < Protocol Discriminator: Q.931 (8) len=9 >> < Call Ref: len= 2 (reference 2/0x2) (Terminator) >> < Message type: DISCONNECT (69) >> < [08 02 80 90] >> >> >> < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 >> Location: User (0) >> < Ext: 1 Cause: Normal Clearing (16), class = Normal Event >> (1) ] >> -- Processing IE 8 (cs0, Cause) >> >> q931.c:3779 q931_receive: call 32770 on channel 1 enters state 12 >> (Disconnect Indication) >> >> -- Channel 0/1, span 1 got hangup request, cause 16 >> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, >> peerstate Disconnect Request >> q931.c:2920 q931_release: call 32770 on channel 1 enters state 19 (Release >> Request) >> >> > Protocol Discriminator: Q.931 (8) len=9 >> > Call Ref: len= 2 (reference 2/0x2) (Originator) >> > Message type: RELEASE (77) >> > [08 02 81 90] >> > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 >> > Location: Private network serving the local user (1) >> > Ext: 1 Cause: Normal Clearing (16), class = Normal Event >> > (1) ] >> >> -- Hungup 'Zap/1-1' >> == Spawn extension (incoming-from-pri, 39114600, 2) exited non-zero on >> 'Zap/31-1' >> >> >> -- Executing [...@incoming-from-pri:1] Hangup("Zap/31-1", "") in new >> stack >> == Spawn extension (incoming-from-pri, h, 1) exited non-zero on 'Zap/31-1' >> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate Active >> >> >> q931.c:2968 q931_disconnect: call 21 on channel 31 enters state 11 >> (Disconnect Request) >> >> > Protocol Discriminator: Q.931 (8) len=9 >> > Call Ref: len= 2 (reference 21/0x15) (Terminator) >> >> > Message type: DISCONNECT (69) >> > [08 02 81 90] >> > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 >> > Location: Private network serving the local user (1) >> >> > Ext: 1 Cause: Normal Clearing (16), class = Normal Event >> > (1) ] >> >> -- Hungup 'Zap/31-1' >> < Protocol Discriminator: Q.931 (8) len=5 >> >> < Call Ref: len= 2 (reference 2/0x2) (Terminator) >> < Message type: RELEASE COMPLETE (90) >> q931.c:3719 q931_receive: call 32770 on channel 1 enters state 0 (Null) >> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null >> >> >> NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null >> < Protocol Discriminator: Q.931 (8) len=5 >> < Call Ref: len= 2 (reference 21/0x15) (Originator) >> < Message type: RELEASE (77) >> q931.c:3754 q931_receive: call 21 on channel 31 enters state 0 (Null) >> >> >> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release >> Request >> >> > Protocol Discriminator: Q.931 (8) len=9 >> > Call Ref: len= 2 (reference 21/0x15) (Terminator) >> >> > Message type: RELEASE COMPLETE (90) >> > [08 02 81 90] >> > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 >> > Location: Private network serving the local user (1) >> >> > Ext: 1 Cause: Normal Clearing (16), class = Normal Event >> > (1) ] >> >> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null >> >> NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null >> >> >> On Tue, Oct 13, 2009 at 9:16 PM, Michael S Collins >> <[email protected]>wrote: >> >>> >>> On Oct 13, 2009, at 6:45 AM, lakshmanan ganapathy <[email protected]> >>> wrote: >>> >>> We are using Reliance as the Carrier. >>> I think, with this same Reliance carrier, in my office, they are able to >>> make outgoing calls through asterisk+libpri. >>> >>> >>> If that's the case I would be very interested in seeing a pri debug from >>> a working call on an asterisk box. It might give us a clue as to what is not >>> working. -MC >>> >>> >>> >>> On Tue, Oct 13, 2009 at 12:19 AM, Michael Collins < <[email protected]> >>> [email protected]> wrote: >>> >>>> Lak, >>>> >>>> Okay I will need a little bit of time to dig into the IE's and what they >>>> contain. In the meantime can you tell me who the carrier is? I'd like to >>>> find out if they have some specific requirements. The fact that it doesn't >>>> work with libpri surprises me because that would mean that Asterisk systems >>>> would probably not work with this carrier as well. >>>> >>>> BTW, thanks for the very complete pastebin entries. :) >>>> -MC >>>> >>>> >>> _______________________________________________ >>> FreeSWITCH-users mailing list >>> [email protected] >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >>> http://www.freeswitch.org >>> >>> >> >> _______________________________________________ >> FreeSWITCH-users mailing list >> [email protected] >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> >> > > _______________________________________________ > FreeSWITCH-users mailing list > [email protected] > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > >
_______________________________________________ FreeSWITCH-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
