Hi Mike,
thanks for the reply. I am using the pre-compiled Windows binary - is there a
1.0.5 pre-release of that yet ?
FreeSwitch reports its version as 1.0.4 (14460) but this is not correct, I was
sure that I had previously loaded a later SVN Version, but just did it again,
unless I'm not doing it right, the version number does not seem to be getting
updated. The current build in the precompiled binaries area is reported to be
15604 and I've downloaded and installed that - although when the installer runs
it tells me that it is version 15376. Either way, the "Version" command in
FreeSwitch reports 1.0.4 (14460).
The Transfer still does not work for me from the extension which answers the
call.
Sorry if my earlier questions were unclear ...
"What are the correct LISTEN_TO and RESPOND_ON entries in dialplan.xml ?"
What is the correct "transfer" data string in features.xml ?
I don't understand this question(s)
I was looking for clarification of the second two arguments in the
bind_meta_app data call, i.e, that the "b" and "s" were the correct values and
also that the "is transfer" "transfer" data argument was "-bleg"
That is, that the arguments in the default dialplan are correct for this
scenario - which they appear to be based on your previous reply to my query.
So, is there anything else that I can check to see why this is not working ?
regards
Dave
----- Original Message -----
From: Michael Jerris
To: freeswitch-users@lists.freeswitch.org
Sent: Tuesday, November 24, 2009 8:19 PM
Subject: Re: [Freeswitch-users] Call Transfer Help Please
On Nov 24, 2009, at 5:29 AM, Dave Stevenson wrote:
Hi,
I'm trying to setup call transfer for a phone without a transfer button. I
was on IRC last night and got some pointers to how this is setup in
dialplan.xml and features.xml and what "bind meta app" does.
Once it became clear how the transfer is initiated and that the transfer,
in the default config, can only be initiated by the "b" leg of the call, I was
able to make this work as configured in the defaults, i.e, to initiate a
transfer (for an internal call) from the dialled extension to a new extension.
Now the problem . . .
I have an incoming PSTN line that rings a group of extensions, what I want
to be able to do is to give whoever answers the PSTN call ability to transfer
the call on to another extension.
There is an ATA (Linksys SPA3101) set up on the PSTN line with a FreeSwitch
extension of 1000, it rings the extension phones in the group.
I'd hoped that the default transfer setup would handle this without
modification - the incoming call on extension 1000 would be the "a" leg, the
answering extension would be the "b" leg and a transfer from "b" would work as
per the default config. This does not work for me though.
I'm struggling a bit with the "bind meta app" options and can't seem to
make it do what I want.
Could someone please confirm that what I'm trying to do is feasible and
perhaps suggest the right parameters to use in dialplan.xml and features.xml
please ?
Relevant section in the "is_transfer" section in features.xml
<action application="transfer" data="-bleg ${digits} XML default"/>
And in default.xml from
<action application="bind_meta_app" data="1 b s execute_extension::dx XML
features"/> to
I've tried posting a call log to the Pastebin (11252/3) but there was an
error - it looks like the dump was too big. Not sure what the maximum size on
pastebin dumps is ?
My understanding (or lack of) of "a" and "b" are in the scenario described
is not helping ...
Is the "a" leg the call coming in on the PSTN line (on Ext 1000) ?
Yes, the calling leg
Is the answering extension the "b" leg ?
Yes
What are the correct LISTEN_TO and RESPOND_ON entries in dialplan.xml ?
I don't understand this question
What is the correct "transfer" data string in features.xml ?
ditto
Or am I totally on the wrong track here ?
You should just need to make sure that the bind meta is called in this
scenario so the b leg is able to do it, thats it.
If it is possible to do what I want, and changes are required to the
dialplan.xml and/or features.xml files, is it possible to have different logic
in there such that the actions are different whether it is the "a" leg or "b"
leg that's requesting the transfer ?
regards
Dave
FreeSwitch Version 1.0.4 (14460)
also, try the latest 1.0.5. pre release or svn trunk to confirm this is not
an issue that has already been fixed.
Mike
------------------------------------------------------------------------------
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
