Ah guys - that was exactly the nudge I was looking for - I will take a look at the other endpoint modules like mod_skypiax etc. I will also look at the SDP - I see where you are going there - I might not even need the conference in that case.
Question is - could I write an endpoint is C# !!! :) Thanks again - that's a great help. On Fri, Dec 4, 2009 at 5:16 PM, Michael Giagnocavo <m...@giagnocavo.net>wrote: > I think you will need to sort out the signaling first, as you’ll have to > tell the conference system to accept which RTP streams for which > conferences, as well as tell it to transmit to your callers, no? > > > > After that, then I would imagine you just need to do SDP rewriting when a > call hits FreeSWITCH. > > > > -Michael > > > > *From:* freeswitch-users-boun...@lists.freeswitch.org [mailto: > freeswitch-users-boun...@lists.freeswitch.org] *On Behalf Of *Phillip > Jones > *Sent:* Friday, December 04, 2009 2:29 PM > *To:* freeswitch-users@lists.freeswitch.org > *Subject:* [Freeswitch-users] Bridging to a non SIP based system > > > > Hi All, > > Every so often you have to ask a question - where you know so little - it's > hard to even now where to start. This is one of the times. I am not > expecting an full answer here, just a gentle nudge in right direction to get > me started. > > What I have is a propriety IP based conference system - who want to add the > ability to have inbound PSTN callers join their conferences. All their > signaling is propriety - no SIP - but I do have access to that signaling > schema so can do some translation. Enough to get the IP / Port & CODEC of > the RTP stream. They use speex rtp sessions over TCP. > > So from an architectural point of view I am thinking of having the callers > enter a FS conference and than bridge that conference to their IP based > conference room. That would do it. > > The problem is that because I can not bridge using SIP (through a Sofia > gateway) to that IP based conference system I am kind of lost. But it seems > reasonable that I should be able to get my head round this, because I know > the IP / Port & CODEC of the RTP stream. > > But perhaps I missing a key bit of knowledge/understanding here. > > I would be grateful for any advise here. > > Thanks a lot, > > > Phil > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > >
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org