Hi (other) Bruce,
On 02-11-11 05:45, Bruce Robertson wrote: > Kristoff -- > > Will you be blogging on your work with open source, D-STAR and ARM > CPUs? That's the goal. :-) > I have a pandaboard, and would love to play around with this, > especially if we could shoehorn Codec2 into the DV stream along the > lines that Simon recommends. (The p'board does Codec2 happily in > floating point.) I'm also just generally interested in D-STAR, but > from the inside out, not as a black box. Nice! As far as I see, there are three elements that have to discussed beforehand: - exact format (change format of checksum, set some value in the "flag3" field, change bits in the "sync" frames (slow-speed data part of first frame + every 21 frames). - what FEC to use? - documentation for the API for the codec2 library? E.g. I looked in the source-code of c2enc.c and c2dec.c, but did not find any commands to -say- configure the bitrate of the encoder. > 73, (other) Bruce VE9QRP > P.S. You can add this device to the list of possible target hardware: > http://www.adafruit.com/products/513 Wauw. This is interesting!!! To bad it doesn't have native audio in/out, but that's the least of the issue! Thanks for the info! 73 Kristoff - ON1ARF ------------------------------------------------------------------------------ RSA® Conference 2012 Save $700 by Nov 18 Register now! http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Freetel-codec2 mailing list Freetel-codec2@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freetel-codec2
