Hi Alfred, Well done on your integration work. I would be interested to see how 700B mode works for you - I'm getting some good reports from other people.
Thanks, David On 23/08/15 03:54, wully wrote: > Hi > > Now, everything is ok. Analysis gave the correct relation between > modemcount (nin) and the speechoutputcount also on the receiving side, > so, forget my previous mail. > > The code is now running perfectely with 48kS/S-testdata, but a test on > the air has not yet been possible, since the current conditions on 40m > did not allow a qso with dc6ny. Unfortunately, I did not find another > ham who could make a freedv-qso in 700-mode. > > I will report on our experience. > 73, Alfred > > > > > On 21.08.2015 16:05, wully wrote: >> Hi David >> >> I have realized the code. The tests with files runs ok. But on the >> outputstream on the rx-side, I have to upsample again to 48kHz (from >> 8kHz after codec2-decoding). But here I get again 640 Samples, which, >> wenn upsampled will only give 3840 S. But on the input, I have to use >> 4096 Samples to get the 640 from freedv. So, there is again a mismatch. >> Currently, I fill in 0-samples, when the supply from the freedv does not >> fulfil the requests. This is not a critical problem, since it is on the >> audio output side, but I want to be exact. >> >> But probably, I miss again a point. >> >> Alfred >> >> >> >> > > > ------------------------------------------------------------------------------ > _______________________________________________ > Freetel-codec2 mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 > ------------------------------------------------------------------------------ _______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
