My practical experience  (20+ designed) with the JRST pin is you should 
leave it unconnected or pulled.

On 30/01/2016 4:33 PM, David Rowe wrote:
> Hi Stuart,
>
> The link seems to refer to flashing via STLINK - the 3 pin debug connector.
>
> I have used STLINK to flash SM1000s many times during development -
> using just the 3 pins on CN1.  This include 405 and 407 devices.  I used
> a Discovery Board as the emulator "pod".
>
> I'm not familiar with the nJRST pin on the uC, can you pls describe
> exactly what connection you would like to see (i.e. pin numbers, where
> the net would be routed to)?
>
> We have provision for a reset button SW5 (nRST pin 14 on the uC) on the
> SM1000 which I found handy during development when I was flashing via
> STLINK.
>
> I have found DFU mode comes up immediately every time, by holding PTT
> down as the SM1000 is switched on.  I just tried again on a new SM1000
> and 5/5 times on first press. Perhaps you have a hardware fault?
> Cables?  Contact me off list if you think its the SM1000 hardware.
>
> - David
>
> On 30/01/16 14:41, Stuart Longland wrote:
>> Hi all,
>>
>> Here's something we should add to the PCB for the next SM1000 revision,
>> a pin for nJRST.
>>
>> https://sourceforge.net/p/openocd/mailman/message/32108017/
>>
>> Presently, due to that erratum, the only way to flash a SM1000 is using
>> dfu-util, and I'm finding that it might take as many as 5 or 10 attempts
>> of power cycling and pressing PTT in to get it into DFU mode.
>>
> ------------------------------------------------------------------------------
> Site24x7 APM Insight: Get Deep Visibility into Application Performance
> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
> Monitor end-to-end web transactions and take corrective actions now
> Troubleshoot faster and improve end-user experience. Signup Now!
> http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
> _______________________________________________
> Freetel-codec2 mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/freetel-codec2
>

-- 
-
Glen English
RF Communications and Electronics Engineer

CORTEX RF
&
Pacific Media Technologies Pty Ltd

ABN 40 075 532 008

PO Box 5231 Lyneham ACT 2602, Australia.
au mobile : +61 (0)418 975077



------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
_______________________________________________
Freetel-codec2 mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freetel-codec2

Reply via email to