Check the memory requirements of the codec _ create() , because it requires a good amount of heap memory...
On 29 Aug 2016 4:01 p.m., "Daniele Barzotti" < [email protected]> wrote: > Hi, > > First of all, I'm new to codec2. > > I'm developing on a proprietary board based on ATMEL AT32UC3B0512, a > 8MByte Spansion Flash and FreeRTOS. > > What I need to do is to store 8 hours of voice into the flash. > My input stream is a PCM 16 bit 8Khz and I got 20 dword (1 frame) every > 2.5 msec. > Here I have to compress it to a 2 kilobit/second stream. (So here I need > only the encoder part) > > I added the codec2 source to my project and it compile with no problems > but, when I run, it hangs on codec2_create(). > > I tried to create the CODEC2 structure on the stack but with no success. > > My question is: someone known if is possible to run codec2 into a 32-bit > RISC? > > Thanks in advance, > Daniele. > > ------------------------------------------------------------ > ------------------ > _______________________________________________ > Freetel-codec2 mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 >
------------------------------------------------------------------------------
_______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
