For those of you using the FreeDV API - 700C and 800XA are already integrated into the FreeDV API and ready to try.
You may use USB or LSB lol - I just want to hear about your experiences with the mode! Cheers, David On 20/01/17 19:21, Helmut wrote: > Hi, > > it's no sacrilege to use the 'wrong' sideband, if band limits are respected. > On 7 MHz I frequently change the sideband to talk with my friends who run > the Flex 6000 series. The bigger problem is that only a few stations can use > the bit-saving FreeDv mode 700B, which seems a lot more robust and allows > smaller SNRs. > > 73, Helmut, DC6NY > > PS: John, I'm waiting and hoping for our first FreeDV QSO as planned before > the UK Brexit make it impossible, hi. Good luck! > > -----Ursprüngliche Nachricht----- > Von: Gerhard Burian [mailto:[email protected]] > Gesendet: Freitag, 20. Januar 2017 06:47 > An: [email protected] > Betreff: Re: [Freetel-codec2] FreeDV always USB or LSB below 10Mhz and > USBabove? > > Hi All, > > The new piHPSDR-Console for ANAN transceivers unfortunatly also has > implemented FreeDV on all bands in USB. I have allready told them to > change. > > Regards > Gerhard > > -----Ursprüngliche Nachricht----- > Von: Mel Whitten [mailto:[email protected]] > Gesendet: Freitag, 20. Jänner 2017 02:24 > An: [email protected] > Betreff: Re: [Freetel-codec2] FreeDV always USB or LSB below 10Mhz and > USBabove? > > FreeDV follows the SSB convention as has HF digital voice since day 1. QRM > avoidance is aided (not necessarily avoided) when both modes are using the > same "sideband." > > Flex is now aware of this and I am sure will make the change upon the next > update of FreeDV. > > Mel > > > -----Original Message----- > From: David Klippel - N2MHI [mailto:[email protected]] > Sent: Thursday, January 19, 2017 5:40 PM > To: [email protected] > Subject: [Freetel-codec2] FreeDV always USB or LSB below 10Mhz and USB > above? > > Is FreeDV always USB like all digital modes or does it follow the guideline > of LSB below 10Mhz and USB above? > > I use the FlexRadio SmartSDR waveform and have been working under that > assumption that they have implemented it correctly to only use USB. The USB > standard as I understand for digital modes in dependent of SSB guideline of > LSB below 10Mhz and USB above). > > ---------------------------------------------------------------------------- > -- > Check out the vibrant tech community on one of the world's most engaging > tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Freetel-codec2 mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 > > > ---------------------------------------------------------------------------- > -- > Check out the vibrant tech community on one of the world's most engaging > tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Freetel-codec2 mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 > > > ---------------------------------------------------------------------------- > -- > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Freetel-codec2 mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 > > > --- > Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. > https://www.avast.com/antivirus > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Freetel-codec2 mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
