For our International readers .... "chockers" means "very full" in
Australian vernacular :-)
- David
On 25/03/18 10:00, Mark Jessop wrote:
Scratch that. 40m is chockers with DX stations for the CQWW WPX, and I
can't find a clear hole :-(
Maybe next week...
73
Mark VK5QI
On Sat, Mar 24, 2018 at 7:17 PM, Mark Jessop <lenniethelemm...@gmail.com
<mailto:lenniethelemm...@gmail.com>> wrote:
Try 7.177 MHz LSB tomorrow morning around 10:00 AM CDST (so about
10:30AM your local time).
I'll be transmitting the WIA Broadcast via FreeDV 1600 from here in VK5.
Cheers,
Mark VK5QI
On Sat, Mar 24, 2018 at 1:57 PM, Alan Beard
<bear...@unixservice.com.au <mailto:bear...@unixservice.com.au>> wrote:
Hi David,
Both codec2-dev and FreeDV updated to Ver 3431.
Compiled and running, no Segmentation Faults.
Thanks
All I need is some on-air signals. My FT-450 is ready.
Alan VK2ZIW
On Sat, 24 Mar 2018 08:28:21 +1030, David Rowe wrote
> Hi Alan,
>
> OK try "svn up" then make again, have fixed it and checked
into SVN.
>
> Thanks,
>
> David
>
> On 24/03/18 07:11, Alan Beard wrote:
> > *Hi Steve,*
> > *
> > *
> > *I'm not a "C" guru but here is the only meaningful "gdb"
output:*
> > *
> > *
> > *
> > Program received signal SIGSEGV, Segmentation fault.
> > freedv_set_total_bits (f=0x0, val=0)
> > at
> > /downloads/hamradio/digital/FreeDV/3424codec2dev/codec2-
dev/src/freedv_api.c:1611
> > 1611void freedv_set_total_bits (struct
freedv *f, int
> > val) {f->total_bits = val;}
> >
> > *
> > *
> > *and*
> > *
> > *
> > *
> > [Thread 0x7fffd79d5700 (LWP 26620) exited]
> > *** Error in `/home/data/apps/freedv3424/bin/freedv':
malloc(): smallbin
> > double linked list corrupted: 0x0000000000cdd7f0 ***
> > ======= Backtrace: =========
> > ........
> >
/lib64/libwx_baseu-3.0.so.0(_Z7wxEntryRiPPw+0x70)[0x7ffff5b2f100]
> > /home/data/apps/freedv3424/bin/freedv(main+0x22)[0x457ce5]
> > /lib64/libc.so.6(__libc_start_main+0xf0)[0x7ffff401c580]
> > /home/data/apps/freedv3424/bin/freedv(_start+0x29)[0x4362c9]
> >
> > ========== All double Dutch to me =======
> >
> > *
> > *
> > *
> > On Fri, 23 Mar 2018 10:31:47 -0500, Steve wrote*
> > > You might try running freedv under gdb.
> > >
> > > $ gdb freedv
> > > (gdb) run
> > >
> > > To figure out what section is causing the memory error.
> >
> >
> > Alan
> >
> > Evil flourishes when good men do nothing.
> > Consider the Christmas child.
> >
--------------------------------------------------------------------------
-
> > Alan Beard Unix Support Technician from 1984
to today
> > 70 Wedmore Rd. Sun Solaris, AIX, HP/UX, Linux,
SCO, MIPS
> > Emu Heights N.S.W. 2750 Routers, terminal servers,
printers, terminals
> > etc..
> > +61 2 47353013 <tel:+61%202%204735%203013> (h)
Support Programming, shell scripting, "C",
> > assembler
> > 0414 353013 (mobile) After uni, electronics tech
> >
> >
> >
--------------------------------------------------------------------------
----
> > Check out the vibrant tech community on one of the world's most
> > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> >
> >
> >
> > _______________________________________________
> > Freetel-codec2 mailing list
> > Freetel-codec2@lists.sourceforge.net
<mailto:Freetel-codec2@lists.sourceforge.net>
> > https://lists.sourceforge.net/lists/listinfo/freetel-codec2
<https://lists.sourceforge.net/lists/listinfo/freetel-codec2>
> >
>
>
----------------------------------------------------------------------------
--
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Freetel-codec2 mailing list
> Freetel-codec2@lists.sourceforge.net
<mailto:Freetel-codec2@lists.sourceforge.net>
> https://lists.sourceforge.net/lists/listinfo/freetel-codec2
<https://lists.sourceforge.net/lists/listinfo/freetel-codec2>
Alan
Evil flourishes when good men do nothing.
Consider the Christmas child.
---------------------------------------------------------------------------
Alan Beard Unix Support Technician from 1984 to today
70 Wedmore Rd. Sun Solaris, AIX, HP/UX, Linux, SCO, MIPS
Emu Heights N.S.W. 2750 Routers, terminal servers, printers,
terminals etc..
+61 2 47353013 <tel:%2B61%202%2047353013> (h) Support
Programming, shell scripting, "C", assembler
0414 353013 (mobile) After uni, electronics tech
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Freetel-codec2 mailing list
Freetel-codec2@lists.sourceforge.net
<mailto:Freetel-codec2@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/freetel-codec2
<https://lists.sourceforge.net/lists/listinfo/freetel-codec2>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Freetel-codec2 mailing list
Freetel-codec2@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freetel-codec2
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Freetel-codec2 mailing list
Freetel-codec2@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freetel-codec2
