Author: duncan
Date: Mon Nov 26 15:57:32 2007
New Revision: 10160
Log:
[ 1838260 ] gphoto plugin for digicams
Copied the text from the Feature Request
Added:
branches/rel-1-7/freevo/Docs/gphoto_plugin.txt (contents, props changed)
branches/rel-1/freevo/Docs/gphoto_plugin.txt (contents, props changed)
Added: branches/rel-1-7/freevo/Docs/gphoto_plugin.txt
==============================================================================
--- (empty file)
+++ branches/rel-1-7/freevo/Docs/gphoto_plugin.txt Mon Nov 26 15:57:32 2007
@@ -0,0 +1,32 @@
+Installation
+------------
+Make sure libgphoto2 is installed.
+
+Copy pygphoto_lowlevel.py, _pygphoto_lowlevel.so and pygphoto.py to a place
+where python can find it (e.g. /usr/lib/python2.4/site-packages)
+
+Copy gphoto.py to the image/plugins directory of your freevo installation.
+(e.g. /usr/share/pycentral/python-freevo/site-packages/freevo/image/plugins)
+
+Add to your local_conf.py
+| plugin.activate('image.gphoto')
+
+
+Usage
+-----
+Plugin digicam in USB port (or whichever port it needs to be plugged in) (and
+switch it on...)
+
+Go to "Look at pictures". Wait up to 10 seconds. Then, there should be a new
+entry now which you can just use like an ordinary directory.
+
+
+Why?
+----
+Some digicams do not implement the usb-storage protocol
+There is a gphotofs, but using this was far too slow.
+
+Author
+------
+Thorsten Pferdekaemper
+Nov 2007
Added: branches/rel-1/freevo/Docs/gphoto_plugin.txt
==============================================================================
--- (empty file)
+++ branches/rel-1/freevo/Docs/gphoto_plugin.txt Mon Nov 26 15:57:32 2007
@@ -0,0 +1,32 @@
+Installation
+------------
+Make sure libgphoto2 is installed.
+
+Copy pygphoto_lowlevel.py, _pygphoto_lowlevel.so and pygphoto.py to a place
+where python can find it (e.g. /usr/lib/python2.4/site-packages)
+
+Copy gphoto.py to the image/plugins directory of your freevo installation.
+(e.g. /usr/share/pycentral/python-freevo/site-packages/freevo/image/plugins)
+
+Add to your local_conf.py
+| plugin.activate('image.gphoto')
+
+
+Usage
+-----
+Plugin digicam in USB port (or whichever port it needs to be plugged in) (and
+switch it on...)
+
+Go to "Look at pictures". Wait up to 10 seconds. Then, there should be a new
+entry now which you can just use like an ordinary directory.
+
+
+Why?
+----
+Some digicams do not implement the usb-storage protocol
+There is a gphotofs, but using this was far too slow.
+
+Author
+------
+Thorsten Pferdekaemper
+Nov 2007
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Freevo-cvslog mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-cvslog
