Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification.
The following page has been changed by 66.31.37.28: http://freevo.sourceforge.net/cgi-bin/moin.cgi/FrequentlyAskedQuestions ------------------------------------------------------------------------------ @@ -357,3 +357,8 @@ The simplest answer is any card with v4l or v4l2 drivers. The developers have had good experiences with the BTTV family of cards, produced by [http://www.hauppauge.com/"; Hauppauge] and [http://www.aver.com/products/tvtuner_AVerTV.shtml Aver]. They are typically the best supported under Linux, though the WinTV PVR cards from Hauppauge are not completely supported yet. Keep an eye on [http://ivtv.sourceforge.net/ ivtv.sf.net] if you're interested in hardware MPEG-2 encoding via those cards. + += I have digital cable, can freevo record programs by tuning it directly? = + +Digital Cable in the United States has not been standardized. There are currently no support for tuning digital tv natively in freevo at the moment. Depending on your hardware (whether you have a serial or a port for recieving IR signals (looks like a headphone jack)) you might be able to use scripts to tune your digital cable box but these scripts will unfortuneately be hardware specific. Another option maybe an IR signal sender like IRblaster but again custom scripting will be required. +Digital Cable users in Europe might be able to use linuxtv.org. ------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 _______________________________________________ Freevo-wikilog mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-wikilog
