Hi, First, I have progressed since yesterday. I replaced vesafb by viafb. So I remove "vga=791" in my kernel line of boot. Then I put in /etc/modules: viafb mode=1024x768 refresh=75 Then reboot. I wanted to apply the viafb_03.diff patch to my kernel (2.6.12.3) but there is an error: patching file drivers/video/Makefile Hunk #1 FAILED at 34 Do you know what is this?
Secondly, If I want freevo not to stop when it arrives on the main menu, I have to put in freevo.conf : 800x600 and not 1024x768. But curiously, it starts in 1024x768 (I don't know why). Thirdly I have still this problem: > [EMAIL PROTECTED] wrote: > > I can't move in the main menu (I can only > go > > in "Watch tv"). If I press the down/right button to move in the menu > freevo > > stops, whereas in "watch tv" section, these buttons works well. > > I also installed freevo 2 on a debian with server X and I have the same > problem. > > > > Do you know why it does this? > > It sounds like some lirc or input plugin problem. Do the logs tell you > anything? > > -Rob I only have these informations: WARNING __init__(292): VIDEO_SHOW_DATA_DIR not found Can't find lsdvd. DVD support will be limited and maybe not all discs are detected. Please install lsdvd, you can get it from http://acidrip.thirtythreeandathird.net/lsdvd.html After installing it, you should run 'freevo cache --rebuild' DEBUG: size is 800x600 (*) DirectFB/Config: Parsing config file '/etc/directfbrc'. (*) DirectFB/Config: Parsing config file '/root/.directfbrc'. ---------------------- DirectFB v0.9.23 --------------------- (c) 2000-2002 convergence integrated media GmbH (c) 2002-2004 convergence GmbH ----------------------------------------------------------- (*) DirectFB/Core: Single Application Core. (2005-10-03 17:21) (*) Direct/Memcpy: Using MMXEXT optimized memcpy() (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 4048)... (*) Direct/Thread: Running 'LiRC Input' (INPUT, 4049)... (!!!) *** UNIMPLEMENTED [fusion_reactor_set_lock] *** [reactor.c:797] (*) DirectFB/Input: LIRC Device 0.2 (convergence integrated media GmbH) (*) Direct/Thread: Running 'Linux Input' (INPUT, 4050)... (*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1 (convergence integrated media GmbH) (*) Direct/Thread: Running 'Linux Input' (INPUT, 4051)... (*) DirectFB/Input: PC Speaker (2) 0.1 (convergence integrated media GmbH) (*) Direct/Thread: Running 'Keyboard Input' (INPUT, 4052)... (*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH) (*) DirectFB/Genefx: MMX detected and enabled (*) DirectFB/Graphics: MMX Software Rasterizer 0.6 (convergence integrated media GmbH) (*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH) DirectFB layer config: buffermode: 4 goemetry: 800x600 pixelformat: DSPF_RGB32 (!) [ 4037: 0.000] --> Caught signal 11 (at 0x6df8f000, invalid address) <-- Thanks for your help vincent ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Freevo-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freevo-devel
