Michael Beal wrote: > Since a lot of people here in the U.S. have DirecTV, I decided to > create a plugin to handle sending IR signals to a DirecTV receiver. So > far this plugin has worked quite well on my friend's Freevo box. I've > attached the plugin and a patch for config.py to add the irsend_trans > setting, described below. > > The setting "irsend_trans" has to be added to the TV_VIDEO_GROUP which > belongs to the DirecTV external tuner to make everything work correctly > with the IR transceivers that come with the Hauppauge MCE Kits. These > IR units have 2 blaster ports. One port _should_ be selected for use > with the DirecTV receiver. The other port could be used with a VCR or > other IR controlled unit. If the IR port on the transceiver isn't > selected, BOTH blasters fire (if connected), potentially causing > improper behaviour of the DirecTV unit. > > I'm working on moving the core IR functions out into a separate plugin.
I need a feature request for this: http://sourceforge.net/tracker/?func=add&group_id=46652&atid=446898 Unless you don't want it in svn. There are tabs in the source code, Freevo uses 4 spaces. see http://doc.freevo.org/CodingStandard Duncan ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Freevo-devel mailing list Freevo-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-devel
