For your audio u need to set: MPLAYER_AO_DEV = 'alsa9:spdif' and use the: MPLAYER_ARGS_DEF -ac hwac3, switch (with the ,) to get ure spdif output working.
If u have ure modules loaded correctly see alsa-project.org. Also set ure /dev/dsp right or use oss compatible module (snd-pcm-oss and snd-oss-mixer) That should fix your sound problems. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, February 02, 2004 11:51 PM Subject: [Freevo-users] problems with freevo and Hauppauge PVR350 TV-Out (plus SPDIF audio) > > > > > Hi, > > I'm on my way building my own HTPC. > As I won't be able to build the full-blown wish-system in the near future > (DVB-S server in the cellar, streaming to the clients in the rooms), > I started with a client. > > I have to begin with an analog tv I decided to use freevo as I like its > overall concept better than the other solutions. > As the system will be in the living room only the TV should be attached, > no keyboard, commands only via IR. > > hardware: Shuttle SB61G2, P4 2.6, 1 GB, 160 GB HDD > on-board Intel Extreme Graphic 2 with opt. TV-Out > on-board sound i810 with SPDIF out > Hauppauge PVR 350 > > software: knoppix 3.3 , kernel 2.4.22, linux-wlan-ng-0.2.1-pre16, > ivtv-0.19, > lirc-0.7.0pre2, alsa-driver-1.0.2a > freevo 1.41 binary install > > I installed knoppix, compiled the kernel, added the modules and freevo. > With the monitor attached to VGA I got nearly everything working, but > freevo does not show up on the TV screen. (problem one) > > This could be the reason: > > Feb 2 21:31:36 media kernel: ivtv-fb does not support changing the video > mode > Feb 2 21:31:36 media modprobe: modprobe: Can't locate module > char-major-10-32 > Feb 2 21:31:36 media modprobe: modprobe: Can't locate module > char-major-10-32 > > but I've no idea and nothing found what can solve the issue. :-( > I probably missing only a small thing. > > (problem two: I've connected SPDIF out to my amplifier, set in alsamixer > Master a. PCM to 74, IEC958 Playback AC97-SPSA to 0 but I don't get > any sound output when playing something with mpg123 -o alsa.) > > ivtv: I can watch tv with mplayer and I get a test screen on the TV. > > Feb 2 21:31:32 media kernel: Linux video capture interface: v1.00 > Feb 2 21:31:32 media kernel: i2c-core.o: i2c core module > Feb 2 21:31:32 media kernel: i2c-algo-bit.o: i2c bit algorithm module > Feb 2 21:31:32 media kernel: i2c-core.o: driver i2c TV tuner driver > registered. > Feb 2 21:31:32 media kernel: [saa7127.c: INFO]: SAA7127 video encoder > driver loaded > Feb 2 21:31:32 media kernel: i2c-core.o: driver saa7127 registered. > Feb 2 21:31:32 media kernel: i2c-core.o: driver saa7115 registered. > Feb 2 21:31:32 media kernel: i2c-core.o: driver i2c msp3400 driver > registered. > Feb 2 21:31:32 media kernel: ivtv: version 0.1.9 (release) loading > Feb 2 21:31:32 media kernel: ivtv: SGarray_size = 340, DSGarray_size = 56 > Feb 2 21:31:32 media kernel: ivtv: Found an iTVC15 based chip > Feb 2 21:31:32 media kernel: tuner: chip found @ 0xc2 > Feb 2 21:31:32 media kernel: i2c-core.o: client [(tuner unset)] registered > to adapter [ivtv i2c driver #0](pos. 0). > Feb 2 21:31:32 media kernel: saa7127: Configuring encoder...<6>hub.c: new > USB device 00:1d.3-1, assigned address 2 > Feb 2 21:31:32 media kernel: usb.c: USB device 2 (vend/prod 0x124a/0x168b) > is not claimed by any active driver. > Feb 2 21:31:32 media kernel: i2c-core.o: client [saa7127[0]] registered to > adapter [ivtv i2c driver #0](pos. 1). > Feb 2 21:31:32 media kernel: saa7114.c: starting probe for adapter ivtv > i2c driver #0 (0x10005) > Feb 2 21:31:32 media kernel: saa7114.c: detecting saa7114 client on > address 0x42 > Feb 2 21:31:32 media kernel: saa7115.c: writing init values > Feb 2 21:31:32 media kernel: i2c-core.o: client [saa7115[0]] registered to > adapter [ivtv i2c driver #0](pos. 2). > Feb 2 21:31:32 media kernel: msp34xx: init: chip=MSP3418W-A2, has NICAM > support > Feb 2 21:31:32 media kernel: msp3410: daemon started > Feb 2 21:31:32 media kernel: i2c-core.o: client [MSP3418W-A2] registered > to adapter [ivtv i2c driver #0](pos. 3). > Feb 2 21:31:32 media kernel: i2c-core.o: adapter ivtv i2c driver #0 > registered as adapter 0. > Feb 2 21:31:32 media kernel: ivtv: Encoder revision: 0x02040011 > Feb 2 21:31:32 media kernel: ivtv: Decoder revision: 0x02020023 > Feb 2 21:31:32 media kernel: tuner: type set to 5 (Philips PAL_BG (FI1216 > and compatibles)) > Feb 2 21:31:32 media kernel: ivtv: Registered v4l2 device, minor 0 > Feb 2 21:31:32 media kernel: ivtv: Registered v4l2 device, minor 32 > Feb 2 21:31:32 media kernel: ivtv: Registered v4l2 device, minor 224 > Feb 2 21:31:32 media kernel: ivtv: Registered v4l2 device, minor 16 > Feb 2 21:31:32 media kernel: ivtv: Registered v4l2 device, minor 48 > Feb 2 21:31:32 media kernel: ivtv: loaded > Feb 2 21:31:32 media kernel: lirc_dev: IR Remote Control driver > registered, at major 61 > Feb 2 21:31:32 media kernel: bttv: driver version 0.7.107 loaded > Feb 2 21:31:32 media kernel: bttv: using 4 buffers with 2080k (8320k > total) for capture > Feb 2 21:31:32 media kernel: bttv: Host bridge is Intel Corp. 82865G/PE/P > Processor to I/O Controller > Feb 2 21:31:32 media kernel: i2c-core.o: driver i2c ir driver registered. > Feb 2 21:31:32 media kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR) > Feb 2 21:31:32 media kernel: i2c-core.o: client [Hauppauge IR] registered > to adapter [ivtv i2c driver #0](pos. 4). > Feb 2 21:31:32 media kernel: lirc_dev: lirc_register_plugin:sample_rate: > 10 > Feb 2 21:31:32 media kernel: ivtv-fb: Framebuffer module loaded (attached > to ivtv card id 0) > Feb 2 21:31:32 media kernel: ivtv-fb: screen coords: [0 0] -> [720 576] > Feb 2 21:31:32 media kernel: ivtv-fb: original global alpha = 208 > Feb 2 21:31:32 media kernel: ivtv-fb: new global alpha = 208 > Feb 2 21:31:32 media kernel: ivtv-fb: current OSD state = 35 > Feb 2 21:31:32 media kernel: ivtv-fb: warning: cannot reserve video memory > at 0xed510000 > Feb 2 21:31:32 media kernel: ivtv-fb: framebuffer at 0xed510000, mapped to > 0xfae68000, size 2818k > Feb 2 21:31:32 media kernel: ivtv-fb: mode is 720x576x32, linelength=2880 > Feb 2 21:31:32 media kernel: Console: switching consoles 1-0 to frame > buffer device > Feb 2 21:31:32 media kernel: fb1: iTVC15 TV out frame buffer device > > alias char-major-61 lirc_i2c > alias char-major-81 videodev > alias char-major-81-0 ivtv > alias /dev/v4l ivtv > options ivtv ivtv_debug=1 ivtv_pal=1 tuner=5 dec_yuv_buffers=20 > options tuner pal=1 > options saa7127 enable_output=1 output_select=0 pal=1 > options msp3400 once=1 simple=1 > add below ivtv msp3400 saa7115 saa7127 tuner > add above ivtv lirc_dev lirc_i2c ivtv-fb > post-install ivtv /usr/local/bin/test_ioctl -d /dev/video0 -u 0xff > > freevo: starts up, works so far on the monitor, but nothing shows up on TV. > > I added the following to boot-config: > FREEVO_HOME="/usr/bin" > SDL_NOMOUSE=1 > SDL_FBDEV="/dev/fb1" > > freevo-conf: > cdparanoia = /usr/bin/cdparanoia > chanlist = europe-west > display = fbdev > fbxine = /usr/bin/fbxine > geometry = 720x576 > jpegtran = /usr/bin/jpegtran > mplayer = /usr/bin/mplayer > oggenc = /usr/bin/oggenc > renice = /usr/bin/renice > setterm = /usr/bin/setterm > tv = pal > version = 2.1 > xine = /usr/bin/xine > > Regards, > Frank > > > > ------------------------------------------------------- > The SF.Net email is sponsored by EclipseCon 2004 > Premiere Conference on Open Tools Development and Integration > See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. > http://www.eclipsecon.org/osdn > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
