I was looking for some help. In the past I had not been using btaudio
instead using the line input from sound card. Since the new cvs and the
pre2 stuff seemed to prefer doing things this way, I thought I should
attempt to get this etup on my system. So far I have either failed to
record using /dev/dsp1 or using /dev/dsp2 I have been able to record but
have no sound that I can hear. I have included all the info I could
think of any clues in any of this?

equipment:

ATI TV wonder VE (a mono card)

modprobe output for btaudio:

Mar 26 15:22:15 pvr kernel: btaudio: Bt878 (rev 17) at 00:10.1, irq: 12,
latency: 32, memory: 0xd9002000
Mar 26 15:22:15 pvr kernel: btaudio: registered device dsp1 [digital]
Mar 26 15:22:15 pvr kernel: btaudio: registered device dsp2 [analog]
Mar 26 15:22:15 pvr kernel: btaudio: registered device mixer1

aumix output for mixer1:

# aumix -d /dev/mixer1 -q
line1 80, 80, P
line2 80, 80, R
line3 80, 80, P

mencoder command used:

nice -n -20 /usr/local/freevo/runtime/apps/mplayer/mencoder -tv
on:driver=v4l:width=496:height=368:input=0:device=/dev/video0:norm=NTSC:chanlist=us-cable:channel=25:adevice=/dev/dsp2:amode=0:audiorate=32000:forcechan=1
 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=900 -oac mp3lame -lameopts cbr:br=128 
-endpos 60 -o test.avi

output from mencoder:

MEncoder dev-CVS-030213-22:32-2.95.3-FREEVO (C) 2000-2003 Arpad Gereoffy
(see DOCS)





FREEVO (http://www.freevo.org) VERSION!!!!!

DO NOT REQUEST SUPPORT FROM THE MPLAYER PROJECT WHEN USING THIS VERSION
OF MENCODER!!!!


CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6,
Stepping: 10)
Detected cache-line size is 32 bytes
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Reading /home/mruelle/.mplayer/codecs.conf: can't open
'/home/mruelle/.mplayer/codecs.conf': No such file or directory
Reading ./runtime/apps/mplayer/codecs.conf: can't open
'./runtime/apps/mplayer/codecs.conf': No such file or directory
Using built-in default codecs.conf
File not found: 'frameno.avi'
Reading config file /home/mruelle/.mplayer/mencoder: No such file or
directory
success: format: 0  data: 0x0 - 0x0
TV detected! ;-)
Selected driver: v4l
 name: Video 4 Linux input
 author: Alex Beregszaszi <[EMAIL PROTECTED]>
 comment: under development
Selected device: BT878(ATI TV-Wonder VE)
 Capabilites: capture tuner overlay clipping frameram scales
 Device type: 235
 Supported sizes: 48x32 => 768x480
 Inputs: 2
  0: Television: tuner audio tv camera  (tuner:1, norm:ntsc)
  1: Composite1: audio camera  (tuner:0, norm:ntsc)
Unable to set trigger: 1
audio block size too low, setting to 8192!
Using input 'Television'
Selected channel: 25 (freq: 229.250)
[V] filefmt:9  fourcc:0x32315659  size:496x368  fps:29.00  ftime:=0.0345
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 32000 Hz, 1 ch, 16 bit (0x10), ratio: 64000->64000 (512.0 kbit)
Selected audio codec: [pcm] afm:pcm (Uncompressed PCM)
==========================================================================
Opening video filter: [expand=-1:-1:-1:-1:1]
Expand: -1 x -1, -1 ; -1  (-1=autodetect) osd: 1
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 496 x 368 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
videocodec: libavcodec (496x368 fourcc=58564944 [DIVX])
Selected video codec: [rawyv12] vfm:raw (RAW YV12)
==========================================================================
MP3 audio selected
Building audio filter chain for 32000Hz/1ch/16bit ->
32000Hz/1ch/16bit...
Writing AVI header...
Forcing audio preload to 0, max pts correction to 0
FT_Stream_Open: could not open `/home/mruelle/.mplayer/subfont.ttf'
FT_Stream_Open: could not open `./runtime/apps/mplayer/subfont.ttf'
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.



-- 
Mike Ruelle
[EMAIL PROTECTED]




-------------------------------------------------------
This SF.net email is sponsored by:
The Definitive IT and Networking Event. Be There!
NetWorld+Interop Las Vegas 2003 -- Register today!
http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
_______________________________________________
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users

Reply via email to