Hello Tommy, > I think that your problem with the TV output might > be related to vertical and horisontal sync > frequencies.
Sorry, I know this is not so much a Freevo issue as an X issue, but I thought I would post here to see if any other ideas popped up. I was able to get a litle further, but still get the blank screen on my TV screen. In looking at the XFree86.0.log file, everything loads, but stops just at the part where the ModeLines would loaded (my laptop also uses the "Trident Cyberblade (generic)", and I compared the logs: everything was fairly identical, up to the point where the Modelines were loaded on my laptop, but nothing on the Freevo box) I was just reminded that there is an X module for the epia, so perhaps I will give that a try (though it's proprietary, which is rather bad, but what can you do) Thanks! Alan ______________________________________________________________________ Post your free ad now! http://personals.yahoo.ca ------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
