hi, sorry, with the last message something got wrong with the subject. So here again: i just assembled a vga2scart adapter it works fine. Great picture qualtity. But i still have some questions: 1. I tried several grafik cards and my ati mobility 9000 does only provid a min. pixelclock of 20Mhz :( Does anyone know how to adjust the modeline to achive a proper pal picture? 2. With my very old ati rage64 everyting works fine with XFree. But i want to user freevo in fb-mode. I already adjusted my /etc/fb.modes but whenever i add "laced ture" an error occurs. here my fb.mode entry: mode "pal" geometry 768 576 768 576 8 timings 67796 80 16 37 6 80 6 laced true hsync low vsync low endmode 3. is it possible to boot directly into the desired fbmode? I added follwoing lines to my lilo.conf but it does not work: vga=792 append="hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi apm=power-off nomce video=atyfb:pixclk:67796,xres:768,yres:576, depth:16,left:80,right:16,hslen:80,upper:37,lower:6,vslen:6"
interlace and hsync and vsync are missing but the other values are correct because they work with fbset but not with lilo thx, rudi ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com. _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
