Sure, I've attached a copy of my XFree86 to this message. Note that I use Screen0 by default when I boot into X. I use the screen tvout when booting into Freevo via a run level 4 configuration. Both configurations work fine with my TV through the SVIDEO port. The only reason I have the two screens is that I have been attempting to get a little better quality by having a specific tv configuration. As you will see, I haven't done much with it yet.
As for the root of the problem, I think I cause the error by having: Option "TVStandard" "NTSC" Rather than: Option "TVStandard" "NTSC-M" One last note, I am running RH9. Not sure if that matters or not, but I thought I'd mention it. -Davin ----- Original Message ----- From: "Taylor Dondich" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Wednesday, July 02, 2003 11:39 AM Subject: Re: [Freevo-users] Problem with TV-Out on Nvidia Geforce 4ti > Is there any chance you can send me a copy of your XFree86 config when > you have a chance? It'd really help to have a reference. > > Thanks, > > Taylor > > > Davin Desborough wrote: > > > I had the same problem. For me, it turned out that my card/driver did not > > like one of the option statements. It was either the one that set NTSC or > > the one that set the output to SVIDEO (I think this was it). Removing the > > offending option got everything up and running for me. > > > > Sorry I'm being vague, but I'm at work and don't have the config file > > available. > > > > -Davin > > ----- Original Message ----- > > From: "Taylor Dondich" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Tuesday, July 01, 2003 5:43 PM > > Subject: [Freevo-users] Problem with TV-Out on Nvidia Geforce 4ti > > > > > > > >>I have RedHat 8.0, with an Nvidia Geforce 4ti. When RedHat installed, > >>it used it's vesa driver, with 16-bit graphics at 800x600 and displayed > >>fine on my television (A Sony 27-inch trinitron). I am trying to > >>install the accelerated nvidia drivers from nvidia's site. I am using > >>the latest drivers. The driver supposedly installs fine. After > >>configuring my XFree86 configuration file as shown in the FreeVo > >>documentation (and also consulting nvidia's readme as well), I attempt > >>to startx and receive this error: > >> > >>(EE) NVIDIA(0): No modes remaining for display device: TV-0 > >>(EE) NVIDIA(0): *** Aborting *** > >>(EE) Screen(s) found, but none have a usable configuration. > >> > >> > >>Has anyone run into this issue? How can I troubleshoot this further? > >> > >>Taylor > >> > >> > >> > >>------------------------------------------------------- > >>This SF.Net email sponsored by: Free pre-built ASP.NET sites including > >>Data Reports, E-commerce, Portals, and Forums are available now. > >>Download today and enter to win an XBOX or Visual Studio .NET. > >>http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01 > >>_______________________________________________ > >>Freevo-users mailing list > >>[EMAIL PROTECTED] > >>https://lists.sourceforge.net/lists/listinfo/freevo-users > >> > > > > > > > > > > ------------------------------------------------------- > > This SF.Net email sponsored by: Free pre-built ASP.NET sites including > > Data Reports, E-commerce, Portals, and Forums are available now. > > Download today and enter to win an XBOX or Visual Studio .NET. > > http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01 > > _______________________________________________ > > Freevo-users mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > -- > Taylor Dondich > Majik Networks > www.majiknetworks.com > 702-896-3470 - Office > 702-617-9613 - Fax > >
XF86Config
Description: Binary data
