Hi,
Yes I know. But the monitor alone does not work either. Also Freevo 1.3.2 _works_
perfectly so something has been changed in current Freevo, which causes this.
I have both Freevo 1.3.2 and 1.3.4 installed at the same time so I can easily confirm
that 1.3.2 works and 1.3.4 does not work.
-Teemu-
> you do know that televisions can not handle resolutions that your
> monitorcan...
>
> I'm betting anything over 800X600 will not work.
>
> I have had zero luck with ATI cards under linux, I always end up
> tradingthem to someone for an nvidia card....
>
>
> Hope you have better luck!
>
>
> -----Original Message-----
> From: Teemu Ahola [EMAIL PROTECTED]
> Sent: Friday, August 29, 2003 12:33 PM
> To: Freevo Users mailing list
> Subject: Re: [Freevo-users] Re: Problen with newest Freevo
>
>
> Hi,
>
> Still no help ;). Basically my monitor goes Power Off and if my TV
> is
> connected to my Radeon7000 SVIDEO connection, its picture goes
> disordered. It seems that video signal goes to a mode, which is not
> supported by my monitor nor my TV. Freevo 1.3.2 works OK. Also
> under
> XFree Freevo works correctly. If I export SDL_VIDEODRIVER=fbcon I
> get
> following output:
>
>
>
> WARNING: freevo_config.py was changed, please check local_config.py
>
> You are using version 3.5, changes since then:
> Version 3.6:
> Added USE_MEDIAID_TAG_NAMES as directory based variable and
> HIDE_UNUSABLE_DISCS to hide discs in the wrong menus and empty
> drives
>
>
> ROM_DRIVES: Auto-detected and added "('/mnt/cdrom',
> '/dev/cdroms/cdrom0', 'CD-1')"
> Traceback (most recent call last):
> File "./src/main.py", line 99, in ?
> skin = skin.get_singleton()
> File "./src/skin.py", line 71, in get_singleton
> exec('import skins.' + config.OSD_SKIN + '.' + config.OSD_SKIN
> + '
> as skinimpl')
> File "<string>", line 1, in ?
> File "./src/skins/main/main.py", line 58, in ?
> import xml_skin
> File "./src/skins/main/xml_skin.py", line 57, in ?
> osd = osd.get_singleton()
> File "./src/osd.py", line 218, in get_singleton
> _singleton = util.SynchronizedObject(OSD())
> File "./src/osd.py", line 365, in __init__
> pygame.display.init()
> pygame.error: No available video device
>
>
>
> On Sun, 2003-08-24 at 16:46, Dirk Meyer wrote:
> > teemu ahola wrote:
> > > Hi,
> > >
> > > Sorry. I still does not work ;). Or maybe I did something
> wrong. I
> > > simply 'check out' files from cvs and ran './freevo setup',
> updated
> > > freevo.conf 'display = fbdev:vidix' and ran './freevo'.
> >
> > display=fbdev:vidix is not valid. Use display=fbdev and set
> > fbdev:vidix manualy as output device for mplayer. If it still
> doesn't
> > work, try export SDL_VIDEODRIVER=fbcon before starting Freevo. If
> you
> > still have problems, please mail what exactly happens.
> >
> --
> Teemu Ahola
> EMail : [EMAIL PROTECTED]
> [EMAIL PROTECTED]
> Mobile: +358 50 5873210
>
begin:vcard
n:ahola;teemu
fn:teemu ahola
tel;cell:+358 (050) 5873210
adr:;;;Oulu;;;Finland
version:2.1
email;internet:[EMAIL PROTECTED]
end:vcard
