At this point, I can view my listing and schedule a recording, but I'm getting the following error in the log file when it attempts to record. Can anyone tell me what I'm missing? Thanks, Peter
MEncoder 0.91-RPM-3.1 (C) 2000-2003 MPlayer Team CPU: Advanced Micro Devices Duron MG Morgan (Family: 6, Stepping: 0) Detected cache-line size is 64 bytes CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0 Reading /home/freevo/.mplayer/codecs.conf: can't open '/home/freevo/.mplayer/codecs.conf': No such file or directory Reading /etc/mplayer/codecs.conf: 50 audio & 136 video codecs File not found: 'frameno.avi' Reading config file /home/freevo/.mplayer/mencoder: No such file or directory init_freetype Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay success: format: 0 data: 0x0 - 0x0 TV detected! ;-) Selected driver: v4l name: Video 4 Linux input author: Alex Beregszaszi <[EMAIL PROTECTED]> comment: under development Selected device: BT878(Hauppauge (bt878)) Capabilites: capture tuner overlay clipping frameram scales Device type: 235 Supported sizes: 48x32 => 768x480 Inputs: 4 0: Television: tuner audio tv camera (tuner:1, norm:ntsc) 1: Composite1: audio camera (tuner:0, norm:ntsc) 2: S-Video: audio camera (tuner:0, norm:ntsc) 3: Composite3: audio camera (tuner:0, norm:ntsc) mbuf: size=8519680, frames=4 Audio devices: 1 Video capture card reports the audio setup as follows: 0: TV: muted=no vol=0 bass=0 treble=0 balance=0 mode=mono chan=1 unable to open '/dev/dsp4': No such file or directory ============ Sorry, this file format is not recognized/supported ============= === If this file is an AVI, ASF or MPEG stream, please contact the author! === Cannot open demuxer. Exiting... -- Peter Howell <[EMAIL PROTECTED]> ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
