Hi all, I have had a hard time setting up recording in version 1.3.4, so I decided to try to set up version 1.4rc1.
I used the RPM's from the sourceforge site. I copied the freevo_config.py to local_config.py and added in the TV channels. I ran freevo's setup and got the following: cdparanoia = ./runtime/apps/cdparanoia chanlist = us-cable display = x11 geometry = 800x600 jpegtran = ./runtime/apps/jpegtran lame = ./runtime/apps/lame mplayer = /usr/bin/mplayer oggenc = ./runtime/apps/oggenc renice = /usr/bin/renice setterm = /usr/bin/setterm tv = ntsc version = 2.1 Now, when I try to run freevo, I get the following error: ========== ERROR: The version information in freevo_config.py does't match the version in /etc/freevo/freevo.conf. please rerun "freevo setup" to generate a new freevo.conf You are using version 2.1, changes since then: The changelist has not been updated, please notify the developers! ================== I have read through the files, and I am not quite sure what I need to change in either the freevo_config or local_config files. I feel that this must be obvious, but I am a bit of a freevo newb, so I am a little hesitant to really mess with the code too much. I have tried to alter this line: FREEVO_CONF_VERSION = setup_freevo.CONFIG_VERSION To this: FREEVO_CONF_VERSION = 2.1 But I still get the same error. Thanks for the help, Mike ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
