Maybe I misunderstood. I thought it was about getting rf from the cable box to the tv and freevo. This would allow all channels to be viewed or watched without switching rf leads. I had assumed he was using composite/rgb/component etc from freevom my mistake :).
Mark On Mon, 27 Oct 2003 20:01:40 +0000 Chris Dennis <[EMAIL PROTECTED]> wrote: > mark wrote: > > On Sat, 25 Oct 2003 18:01:01 +0100 > > "Nick Flowers" <[EMAIL PROTECTED]> wrote: > > > > > >>Hi, > >> > >>I've 100GB free, and feel more at home in Linux than programming a useless old > >>eighties technology VCR - my mouse pointer hovers over an order page for a WinTV > >>PVR 350 PCI. > >> > >>However - Hauppauge's tech-sales bunch say its not RF-loop through - which is a > >>bit annoying, as I'd like to chain the 350 card into my coax loop (Cable box-> > >>VCR -> (new 350 card) -> TV) and be able to record off all possible > >>channels/watch another channel live and playback without messing with cables. > >>But it looks like I'll have to do that with the 350. > >> > >>Anyone got any advice to help me sort my dream setup? > > > > > > I dont have a PVR board, but I would think you could just put a splitter (either > > passive or an rf amplifier) in the cable rf lead. That way you could send one > > cable to the tv and one to freevo. > > > > Mark > > I think what Nick was wanting (and what I want to do with Freevo) is to > have a radio-frequency output from Freevo that carries all the usual > channels (from the aerial) plus a Freevo-playback-channel. > > In other words, how to you get Freevo to act like a VCR's RF-out socket? > I know there may be some loss of picture quality in converting the MPEG > back to RF rather than using plain composite video (or RGB, or S-video), > but it would be more convenient when plumbing the Freevo into my house's > existing co-ax wiring. > > I thought initially that the PVR 350 had an RF output, but the specs > seem to say otherwise. Maybe it's possible to buy or make a separate > gadget that adds a video signal back into an RF feed on a suitable > channel. Any ideas? > > regards > > Chris > > (Yes, I'm new to this list, so 'Hi'.) > > > > > ------------------------------------------------------- > This SF.net email is sponsored by: The SF.net Donation Program. > Do you like what SourceForge.net is doing for the Open > Source Community? Make a contribution, and help us add new > features and functionality. Click here: http://sourceforge.net/donate/ > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
