I have less luck with TVTime then with Freevo/Mplayer. It just gives a blue screen with no input available on /dev/video0

Which is the same location Mplayer is finding the G400 at.

On Thursday, October 30, 2003, at 11:09 PM, [EMAIL PROTECTED] wrote:

Message: 5
From: Mike Heanssgen <[EMAIL PROTECTED]>
To: "'[EMAIL PROTECTED]'"
         <[EMAIL PROTECTED]>
Subject: RE: [Freevo-users] Re: G400-TV Card Question
Date: Thu, 30 Oct 2003 08:32:19 -0500
Reply-To: [EMAIL PROTECTED]

Have you looked at tvtime? I've considered using this as the main source
for tv viewing since from what I've read, it's compatible with the G400tv.


-----Original Message-----
From: Shawn Parr [mailto:[EMAIL PROTECTED]
Sent: Wednesday, October 29, 2003 9:16 PM
To: [EMAIL PROTECTED]
Subject: [Freevo-users] Re: G400-TV Card Question


I am, and I can get TV input going after a long arduous journey. I haven't had time to work with it in the past couple of days, but most of what you need is available through

http://marvel.sf.net

Right now, upon reboot I have to manually re-enable all the modules
with their update script, and sometimes they do not take kindly to
being installed in the usual places.  After that I have to configure
the Marvel using Xawtv to set the proper settings for NTSC, US-cable,
etc.  Mplayer doesn't seem capable of doing that so far (error:  can't
set norm!).  After doing all that I still can't get mplayer to tune tv
right on its own, but freevo seems to slap it upside the head or
something as it displays fine.

I haven't even touched recording or video output yet.



------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users

Reply via email to