Op za 15-11-2003, om 19:24 schreef Japie:
As I tryed to explain I can't find a way to pass alternative
frequentie's to mplayer following the documentation.
I even replaced values in freq.py with frequencies I needed but that
didn't help!!! (maybe mplayer don't uses the freq.py list, but it's
own?)
Since mplayer does happely except freq=value on the commandline I
decided to make an ugly hack:
Replace freevo/src/tv/plugins/mplayer.py lines 182,183 and 184 with the
following:
tvcmd = ('tv:// -tv driver=%s:%s:%s:%s:'
'%s:width=%s:height=%s:%s:freq=%s %s' %
(config.TV_DRIVER, device, input, norm, chanlist,
w, h, outfmt, tuner_channel, config.TV_OPTS))
And use following entry's in your local_conf.py:
TV_CHANNELS = [
( 'nederland1.omroep.nl', 'Nederland 1', '175.25'),
( 'nederland2.omroep.nl', 'Nederland 2', '182.25'),
( 'nederland3.omroep.nl', 'Nederland 3', '189.25') ]
--
Groetjes Japie
-------------------------------------------------------
This SF. Net email is sponsored by: GoToMyPC
GoToMyPC is the fast, easy and secure way to access your computer from
any Web browser or wireless device. Click here to Try it Free!
https://www.gotomypc.com/tr/OSDN/AW/Q4_2003/t/g22lp?Target=mm/g22lp.tmpl
_______________________________________________
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users
