try to remove any mention of xine from your local_config.py or
freevo_ocinfg.py files. It looks like you are trying to use the xine
dvd features, which work, but why not try getting freevo to work first,
then try xine.
A quick wat to see if your using xine is 'grep xine
local/freevo_config.py' and see if activate is set on any xine features.
Mick
On Thu, 2003-11-20 at 03:38, Tom Hightower wrote:
> A little history to show how I got where I'm at:
>
> Installed SuSE 8.2, (everything it would let me)
> Installed Blackdown JRE 1.4
> Removed crippled mplayer with 'rpm -e mplayer'
> Downloaded mplayer from www.mplayerHQ.hu', source code
> Compiled the mplayer source (./configure, make, make install)
> Tested mplayer by playing a DVD
> Downloaded Freevo 1.4rc4, ran 'pythong setup.py install'
> Told that I need mmpython and where to get it
> Downloaded mmpython.prm from suggested site. Installation said that I needed
> livdvdread.so.3
> Found livdvdread.so.3 for SuSE 8.2 on rpm.pbone.net, installed it
> Ran 'rpm -Uvh mmpython' to install mmpython
> Ran 'python seetup.py install' again, same message about mmpython being
> missing. What the heck, I'll reboot.
> Same thing.
> Log out, log in as root. Same thing. Rats.
> Downloaded the Freevo runtime, stuck it in the same directory that I earlier
> had unpacked the freevo stuff.
> Ran './freevo setup', I guess it did what it needed.
> Ran './freevo' - oops, told that I need freevo_conf.py and local_conf.py.
> Looked for those files, the only place I see freevo_conf is in ~/.freevo.
> Copied local_conf.py.sample from freevo directory to .freevo, renamed it to
> local_conf.py
>
> (end of history)
>
> Ran ./freevo, chugs along for a few seconds only to get this stuff then freevo
> bombs out:
>
> [EMAIL PROTECTED]:~> cd freevo
> [EMAIL PROTECTED]:~/freevo> ./freevo
>
> Error: DIR_MOVIES not set, set it to Home directory
>
>
> Error: DIR_AUDIO not set, set it to Home directory
>
>
> Error: DIR_IMAGES not set, set it to Home directory
>
>
> Error: DIR_RECORD not set
> Please set DIR_RECORD to the directory, where recordings should be stored or
> remove the tv plugin. Autoset variable to /home/tomh.
>
> Error: TV_SHOW_DATA_DIR not found
> COVER_DIR not found
> MOVIE_DATA_DIR not found
> ROM_DRIVES: Auto-detected and added "('/media/cdrecorder', '/dev/cdrecorder',
> 'CDREC-1')"
> ROM_DRIVES: Auto-detected that /dev/cdrom is the same device as
> /dev/cdrecorder, skipping
>
> Error: can't find /tmp/TV.xml
> Use xmltv to create this file or when you don't want to use the tv
> module at all, add TV_CHANNELS = [] and plugin.remove('tv') to your
> local_conf.py. TVguide is deactivated now.
>
> WARNING: /etc/freevo/lircrc not found!
>
> WARNING: no pre-cached data
> Freevo will cache each directory when you first enter it. This can
> be slow. Start "./freevo cache" to pre-cache all directories to speed
> up usage of freevo
>
> WARNING: 'xine' version too old, plugin in fallback mode
> You need xine-ui > 0.9.21 to use all features of the 'xine' plugin
> Pygame Parachute Traceback:
> Thread-0x801cb348
> File "/home/tomh/freevo/runtime/lib/python2.3/threading.py", line 204, in
> waitThread-0x801cadf0
> File "/home/tomh/freevo/runtime/lib/python2.3/threading.py", line 204, in
> waitThread-0x801abf10
> File "/home/tomh/freevo/runtime/lib/python2.3/threading.py", line 204, in
> waitThread-0x801b1638
> File "/home/tomh/freevo/runtime/lib/python2.3/threading.py", line 204, in
> waitThread-0x80184790
> File
> "/home/tomh/freevo/runtime/lib/python2.3/site-packages/mmpython/disc/dvdinfo.py",
> line 88, in isDisc
> Thread-0x80015200
> File "/home/tomh/freevo/runtime/lib/python2.3/threading.py", line 100, in
> acquire
> Fatal Python error: (pygame parachute) Segmentation Fault
> [EMAIL PROTECTED]:~/freevo>
>
>
> I'm not sure what to do at this point to resolve the Segmentaion Fault error.
> Any ideas? Dischi?
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: SF.net Giveback Program.
> Does SourceForge.net help you be more productive? Does it
> help you create better code? SHARE THE LOVE, and help us help
> YOU! Click Here: http://sourceforge.net/donate/
> _______________________________________________
> Freevo-users mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/freevo-users
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.net/donate/
_______________________________________________
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users
