>-----Original Message----- >From: [EMAIL PROTECTED] [mailto:freevo-users->[EMAIL PROTECTED] On Behalf Of Bjoern Franke >Sent: Wednesday, January 14, 2004 7:04 PM >To: [EMAIL PROTECTED] >Subject: Re: [Freevo-users] XFree86 using a TV.
>I connected a PAL-TV with a composite-cable, the X-settings are >(gfx-card is a nvidia geforce2 MX with nvidia-driver): >Section "Monitor" > Identifier "Monitor[0]" > ModelName "PAL TV" > VendorName "Orion" > VertRefresh 60 > HorizSync 30-50 >EndSection >Section "Screen" > DefaultDepth 24 > SubSection "Display" > Depth 24 > Modes "800x600" > EndSubSection > Device "Device[0]" > Identifier "TV" > Monitor "Monitor[0]" >EndSection Thanks, I will give this a try. I am a little confused though. Everything I have been reading says that with a Composite connection you can only achieve 640x480i resolution. Also that PAL and NTSC can only do about 15 khz. From your configuration, it looks like you are achieving 800x600 and 30-50 khz. Thanks for the configuration info; I will give it a try this weekend. Jon ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
