Hi Magnus!
There are two things:
1. To map the Special Keys on the ATI Remote you can use (if you run Freevo
on X) xmodmap.
e.g. "keycode 176 = Home" will map the menu button below 7 to HOME.
2. If you just want to have diffenrent function on the standard keys. (e.g.
I wanted to have 'c' working like 'ESC') you can change it in event.py!
Cheers
Fred
----- Original Message -----
From: Magnus Ternstr�m
To: [EMAIL PROTECTED]
Sent: Saturday, January 24, 2004 5:12 AM
Subject: [Freevo-users] ATI remote
Hi everyone!
I'm new to freevo, still trying to get everything working right and i ran
into some problems with my ATI Remote Wonder.
I used the drivers on the gatos page, compiled as a module and loaded into
the kernel. Works great for A B C D E and F-keys, the rest are unmapped.
I then read the installationguide for this remote on freevo's "supported
hardware" page and it tells me to use "lirc" witch has its own "only
availible from CVS"-driver for this remote.
Then i see the "update"-note that says that the gatos "ati_remote.c" driver
that i'm already using should work too...
so, how do i get the keys woking like i want them to without lirc? :)
Many thanks in advance,
Magnus
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users
