I think u have CONFIG_MATROX_MAVEN in your kernel compiled. Remove it and that error is gone :)
See http://www.saunalahti.fi/~syrjala/directfb/Matrox_TV-out_README.txt for more info about what to compile and what not. Good luck. Youri. P.S. I had the same error with CVS version as well. 9.20 seems to fixed it tho. And if u can't compile it like u said. Look if /usr/include/linux is setup correctly. I'm running 2.4.24 with G400clock 32mb and multi patch however i couldn't get directfb to compile with -multi but that's not a big deal with freevo. ----- Original Message ----- From: "William Morgan" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, January 26, 2004 3:21 PM Subject: [Freevo-users] help with matrox g400 and directfb? > Hi all, > > I'm trying to get my g400 to do TV out with directfb. When I run > mplayer with -vo dfgbmga, I get the following output: > > ---------------------- DirectFB v0.9.21 --------------------- > (c) 2000-2002 convergence integrated media GmbH > (c) 2002-2003 convergence GmbH > ----------------------------------------------------------- > > (*) Single Application Core. (with MMX support) (2004-01-25 08:34) > (*) DirectFB/misc/memcpy: using MMXEXT optimized memcpy() > (*) DirectFB/InputDevice: Keyboard 0.9 (convergence integrated media GmbH) > (*) MMX detected and enabled > (*) DirectFB/GraphicsDevice: Matrox G400/G450/G550 0.6 (convergence integrated media GmbH) > (!) DirectFB/Matrox/Maven: Error controlling `/dev/i2c-2'! > --> Device or resource busy > (!) DirectFB/Core/layers: Failed to initialize layer 2! > (!) DirectFB/Core: Could not initialize 'layers' core! > --> Resource in use (busy)! > vo_dfbmga: DirectFBCreate() failed - Resource in use (busy)! > Error opening/initializing the selected video_out (-vo) device. > > > I'm using MPlayer 1.0pre3-3.3.2 which I compiled against a CVS version > (yesterday's) of DirectFB---I couldn't get 0.9.20 to compile. > > This is on a stock 2.4.24 kernel (no multi patch applied) and /proc/bus/i2c > looks like this: > > 2c-0 i2c DDC:fb0 #0 on i2c-matroxfb Bit-shift algorithm > i2c-1 i2c DDC:fb0 #1 on i2c-matroxfb Bit-shift algorithm > i2c-2 i2c MAVEN:fb0 on i2c-matroxfb Bit-shift algorithm > > Any ideas? I'd love to start using Freevo soon but I'm pretty stuck. > > (Incidentally I couldn't get matroxset to even compile... this is on a Debian > testing machine.) > > Thanks in advance, > > -- > William <[EMAIL PROTECTED]> > > > ------------------------------------------------------- > The SF.Net email is sponsored by EclipseCon 2004 > Premiere Conference on Open Tools Development and Integration > See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. > http://www.eclipsecon.org/osdn > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
