> your info plus this link gave the answer,
> http://www.artech365.com/winvdr/bestresolution.htm
> I took  a capture resolution of 320x240 so I didn't
> had to rescale to
> save cpu power.
> After reading the above link I captured at 640x480
> and scaled it
> afterwards to 320x240 and I have splended (almost)
> quality,
> deinterlacing wasn't nessesary...
Ok, since you found out where the problem was, I can
give you one more advice: your problem got solved by
doubling the number of lines captured (480 vs 240),
but the other change (640 vs 320) is irrelevant. It's
ok to capture directly to whatever horizontal res you
want, since that's analogic signal, but the number of
lines matters. Bottom line: you could try capturing at
320:480, and then scale to 320:240, so scaling only in
one direction, saving cpu cycles. Better yet would be
capturing at 320:576 (full pal) and then scale to
whatever. 
 

> Anyway tanks for giving me the solution!
> -- 
> Groetjes Japie
> 
> 
> 
>
-------------------------------------------------------
> The SF.Net email is sponsored by EclipseCon 2004
> Premiere Conference on Open Tools Development and
> Integration
> See the breadth of Eclipse activity. February 3-5 in
> Anaheim, CA.
> http://www.eclipsecon.org/osdn
> _______________________________________________
> Freevo-users mailing list
> [EMAIL PROTECTED]
>
https://lists.sourceforge.net/lists/listinfo/freevo-users 

______________________________________________________________________
Yahoo! Mail: 6MB di spazio gratuito, 30MB per i tuoi allegati, l'antivirus, il filtro 
Anti-spam
http://it.yahoo.com/mail_it/foot/?http://it.mail.yahoo.com/


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users

Reply via email to