I have a problem getting sound to work...
Videorecording wokrs fine, but there is no audio on the recordings - I tried to use btaudio but I cant load the module....
cat /proc/pci says:
Multimedia video controller: Brooktree Corporation Bt848 Video Capture (rev 17).
IRQ 10.
Master Capable. Latency=32. Min Gnt=16.Max Lat=40.
Prefetchable 32 bit memory at 0xdf001000 [0xdf001fff].
Bus 0, device 9, function 0:
There is no "funtion 1" as mentioned on the btaudio page
hwinfo --tv brings up
08: PCI 08.0: 11200 TV Card
[Created at pci.65]
Unique ID: RE4e.7ukYp2vDSVF
Hardware Class: tv card
Model: "Brooktree Bt848 Video Capture"
Vendor: pci 0x109e "Brooktree Corporation"
Device: pci 0x0350 "Bt848 Video Capture"
Revision: 0x11
Memory Range: 0xdf001000-??? (rw,prefetchable)
IRQ: 10 (no events)
Driver Info #0:
Driver Status: bttv is active
Driver Activation Cmd: "modprobe bttv"
Config Status: cfg=yes, avail=yes, need=no, active=unknownnow triying to modprobe btaudio brings
/lib/modules/2.4.21-99-athlon/kernel/drivers/sound/btaudio.o: init_module: No such device
but in the messages log there is
Feb 23 21:55:25 trinity kernel: btaudio: driver version 0.7 loaded [digital+analog]
lsmod is
tvaudio 13540 0 (autoclean) (unused)
bttv 76384 0
tvmixer 3440 0 (unused)
snd-pcm-oss 49344 0 (autoclean)
snd-mixer-oss 15576 0 (autoclean) [snd-pcm-oss]
snd-seq 41424 0 (autoclean)
tuner 10856 1 (autoclean)
i2c-algo-bit 7944 0 (autoclean) [bttv]
i2c-core 15492 0 (autoclean) [tvaudio bttv tvmixer tuner i2c-algo-bit]
videodev 6272 2 (autoclean) [bttv]
soundcore 3940 0 [bttv tvmixer snd]
The system is a clean Suse 9.0 with Athlon-Kernel
Any Ideas ?
Oliver
-- Diese Nachricht wurde digital unterschrieben oliwel's public key: http://www.oliwel.de/oliwel.crt Basiszertifikat: http://www.ldv.ei.tum.de/page72
smime.p7s
Description: S/MIME Cryptographic Signature
