Could you send me your VCR_CMD? That would be great! --Joe
On Fri, 2004-03-26 at 18:27, Jon Reynolds wrote: > On Fri, 2004-03-26 at 05:25, Joe Stump wrote: > > Well 1.5 managed to completely kill a fully working version of Freevo on > > my box. I upgraded with apt-get a couple of days ago and held my breath > > as it successfully recorded two of my favorites. But wait! A new bug in > > the system: the recorded show played in the background. > > > > Some browsing around yielded some info that I found useful: > > http://freevo.sourceforge.net/cgi-bin/moin.cgi/RecordingInfo > > > > I muted the line in and Oprah recorded just fine with sound (don't ask) > > - I figured all was well ... doh. Seinfeld recorded WITHOUT SOUND later > > that night and all subsequent attempts to get recording working with > > sound (both btaudio *AND* line in) are not working. > > > > Anyone out there actually have 1.5 working? Could people send some > > example mplayer/VCR_CMD lines? I'm at a loss while recording was working > > just fine (no background noise, sound during playback) in 1.4 and is now > > TOTALLY broken in 1.5 - especially since I haven't touched anything > > except Freevo ... except those pesky aumix commands ... > > > > --Joe > > Hi Joe, > > I had the same issue as you with recording being heard as the recording > was being recorded. :) I also had tried to mute the line in but then it > recorded with no sound. I also tried the btaudio trick which also did > not work for me because I don't think my wintv card supports it? > > What I finally did was set the aumix command to record at 50%, I > couldn't hear it being recorded unless I put my ear close to the > speaker. When I play it back I can turn it up and hear it just as well > as listening to the tv, so I could probably lower it even less than 50% > and still be able to hear it fine during playback. > > Hope that helps, > > Jon > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: IBM Linux Tutorials > Free Linux tutorial presented by Daniel Robbins, President and CEO of > GenToo technologies. Learn everything from fundamentals to system > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users -- -- Joe Stump, President JCS Solutions p. (734) 786 0176 f. (520) 844 9344 http://www.jcssolutions.com ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
