V4L2 should work fine with any 2.6 kernel, do a lsmod see if bttv module
is loaded. Can you view TV outside freevo using xzwtv or tvtime?
On Tue, 2004-07-06 at 03:29, Jon Morris wrote:
> The signal isn't the issue, a VCR hooked to the same cable works fine.
>
> As for the BTTV module, for my TV_DRIVER I was using V4L2. This seemed to work for
> a while. When I changed that value to BTTV, I didn't even get the blue screen. Is
> there another way I should be loading the bttv module?
>
> Thanks,
> Jon
>
> -----Original Message-----
> From: [EMAIL PROTECTED] on behalf of john molohan
> Sent: Sun 7/4/2004 6:12 AM
> To: [EMAIL PROTECTED]
> Cc:
> Subject: RE: [Freevo-users] Blue Screen...
>
>
>
> If the bttv module isn't loaded you would get this behaviour as well.
>
> On Sun, 2004-07-04 at 14:07 +0800, Mick wrote:
> > Maybe no arial signal?
> >
> > Mick
> >
>
>
> NHS^é[){([ZrAÚyj)
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users
