I use an IRman with gentoo and freevo. I installed libirman (but did not configure its configuration file), then installed LIRC with the irman as the driver. I was then able to use irrecord to show me that it was able to find the irman. Irrecord then let me create the lircd.conf file. I then created a /etc/freevo/lircrc by mapping the siggested buttons from the wiki.
Mike Ruelle [EMAIL PROTECTED] On Sat, 2004-07-31 at 23:20, Joe Harris wrote: > Has anyone had any luck with setting up the irman(serial) with > freevo. The issues I am running into are basically lack of > information. I am helping a friend that is new to freevo and he got > the irman. We have fedora core 2 and freevo 1.5rc4. The thing I am > not so clear on is how to detect if the device is even seen. Also the > box has 4 serial ports which adds to the confusion. We have installed > the lirc stuff as well as libirman. I am not trying to be spoonfed as > my Linux and Freevo experience is fairly knowledgeable. If anyone can > kick me in the right direction, I would greatly appreciate it. > > > > TIA > > > > Joe > > ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
