Hi again! On Thursday 17 March 2005 10:45, Jesper Skelmose Mathiassen wrote: > My box is always on, and I use 10k1 since its an older Live! Value > edition. I assume 10k2 is audigy or extigy?
Yes, it's an audigy. > I use oss. I haven't investigated alsa since I got confused the first > time, however with your recommendation I'll give it another go. Can you > possibly recommend som options for mencoder? > for now I use: adevice=/dev/dsp0:audiorate=44100:buffersize=64 > using oss emulation and alsa drivers. I let mencoder read directly from the tv card. My config is adevice=/dev/dsp2:audiorate=32000:forceaudio:forcechan=1:buffersize=64 where /dev/dsp2 is the audio device from the second analog tv card (i actually use 2 to support live tv and record at the same time). Note, that if you do that (it should work for at least bt8x8 and saa7134 based cards) you are tailored to a small set of sampling rates you can choose from (usually 32000 and 48000). I've chosen 32000 as there were some problems with 48000 and analog tv audio bandwidth is at 15000 here in Germany anyway, so 32000 should be fairly enough. Note that direct sampling from the tv card should result in synchronized audio and video, whereas the usual pass-through cable adds some delay. Stephan ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Freevo-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freevo-users
