You didn't overlook it, I only stuck it up 2 hours ago after Rob said he
didn't have the time :)
Davin Desborough wrote:
THANK YOU!
This was exactly what I was missing. I somehow managed to overlook the
link to that page at the bottom of the AnalogueTvConfig page.
On to recording!
Thanks again,
Davin
Rob Shortt wrote:
Hi,
If you're using ivtv you need to configure the VIDEO_GROUPS section in
local_conf.py. There's some information in the wiki docs about this
but an example for North America is:
VIDEO_GROUPS = [
VideoGroup(vdev='/dev/video0',
adev=None,
input_type='tuner',
input_num=4,
tuner_norm='NTSC',
tuner_chanlist='us-cable',
desc='Regular cable',
group_type='ivtv',
recordable=True),
]
Make sure you take note of the input_num part. That is the input
number of the tuner on my ivtv card - svideo / composite are different
numbers.
The mplayer TV plugin looks at this information and decides whether or
not to use tv:// (which doesn't work for ivtv) or to setup the ivtv
device itself.
-Rob
-------------------------------------------------------
SF.Net email is sponsored by: GoToMeeting - the easiest way to collaborate
online with coworkers and clients while avoiding the high cost of travel
and
communications. There is no equipment to buy and you can meet as often as
you want. Try it
free.http://ads.osdn.com/?ad_id=7402&alloc_id=16135&op=click
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
-------------------------------------------------------
SF.Net email is sponsored by: GoToMeeting - the easiest way to collaborate
online with coworkers and clients while avoiding the high cost of travel and
communications. There is no equipment to buy and you can meet as often as
you want. Try it free.http://ads.osdn.com/?ad_id=7402&alloc_id=16135&op=click
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
